Abstract:Wearable electronics are one of the most rapidly growing industries, due to their extended use in everyday applications resulting in an increased demand for portable energy storage devices. Despite immense success in commercialization of Lithium-ion batteries (LIBs), conventional LIBs suffer from issues of cost and safety. The expanding need for cheaper, and safer energy storage devices led explorations towards alternatives. After careful considerations, Zinc (Zn)-Manganese dioxide (MnO 2 ) based alkaline system was chosen to be investigated in this work due to its low cost, inherent safety, and high theoretical energy density. However, challenges associated with making the aforementioned system rechargeable and highly performing still remains. The work in this study is directed towards enhancing the overall performance of the Zn-MnO 2 alkaline battery in addition to making it suitable for flexible and wearable applications. A highly ionically conducting polymer electrolyte ({5}CP) with excellent physical and electrochemical stability primarily comprising biopolymer chitosan is prepared by using a time and energy-efficient technique. Incorporation of this polymer electrolyte with Zn anode and MnO 2 cathode enabled the successful preparation of a physically flexible cell. To obtain high cyclability and performance of the system; issues of inactive phase formations (Mn x O y , ZnMn x O y ), low active material availability, pronounced shape changes at the anode surface, and zincate ion transfer towards cathode were overcome by enhancing the electrochemically active layers in the system. The assembled cell comprising the enhanced fabricated layers; (i.e. a Zinc/Stainless steel mesh composite anode, a hierarchical binder-free bismuth and copper additives based MnO 2 cathode, and a chitosan-based polymer electrolyte with calcium hydroxide additive) indicated excellent rate capabilities (486 mAh/g @ 0.1 A/g, 78% of the theoretical 2-electron capacity on MnO 2 ), long cycling stabilities (70% retention over 1000 cycles), and good energy densities (155 – 400 Wh/kg @ 0.1 – 1 A/g). Moreover, a number of destructive tests such as being bent, hammered, pressurized, and punctured were conducted on the pouch cell fabricated using the above-mentioned layers to analyze the cells' safety, reliability, and robustness. Results indicated not much deterioration in capacities. Additionally, when the cell was bent and tested for long performance; a stable discharge capacity (270 mAh/g @ 1 A/g) was obtained after 250 cycles, thus attesting to excellent cycling stability. The successful working of the fabricated cell was validated by lighting up an LED. The successful findings presented in this study can chart new pathways to the development of safe, flexible, cost-effective, and more environmentally responsible alternative energy storage sources for wearables.

Wearable Bipolar Rechargeable Aluminum Battery

(Invited) Flexible and Safe Zinc Alkaline Solid-State Rechargeable Battery for Wearable Applications

Bioinspired, Spine‐Like, Flexible, Rechargeable Lithium‐Ion Batteries with High Energy Density

Innovative Strategies Toward Compact, Highly Stretchable, and Fully Transient Primary Batteries with Enhanced Electrical Output for Wearable Electronics

Wearable and Fully Biocompatible All-in-One Structured ′′Paper-Like′′ Zinc Ion Battery

Flexible and Safe Additives-Based Zinc-Binder-Free-Hierarchical MnO2 -Solid Alkaline Polymer Battery for Potential Wearable Applications.

A Non-Flammable Flexible Aluminum-Lithium Dual-Ion Battery with a Wide Temperature Range Based on Ionic Liquid Electrolytes

Flexible Aqueous Li-Ion Battery with High Energy and Power Densities

A Non‐Flammable and Flexible Aluminum Derived Lithium‐Ion Storage Device with a Wide Temperature Range of Operation

Enhanced electrical conductivity and stretchability of ionic-liquid PEDOT:PSS air-cathodes for aluminium-air batteries with long lifetime and high specific energy

Bioinspired staggered-array structure design for flexible batteries

An Integrated Design of Electrodes for Flexible Dual-Ion Batteries

A Flexible Concentric Circle Structured Zinc‐Ion Micro‐Battery with Electrodeposited Electrodes

Energetic and Durable All-Polymer Aqueous Battery for Sustainable, Flexible Power

An extremely safe and wearable solid-state zinc ion battery based on a hierarchical structured polymer electrolyte

Regulating the Double-Way Traffic of Cations and Anions in Ambipolar Polymer Cathodes for High-Performing Aluminum Dual-Ion Batteries

Biomimetic Honeycomb Zn Anode Enabled Multi‐Field Regulation toward Highly Stable Flexible Zn‐Ion Batteries

Bipolar Current Collectors of Cu/polymer/Al Composite for Anode‐Free Batteries

Paper-based aqueous Al ion battery with water-in-salt electrolyte

A Prussian‐Blue Bifunctional Interface Membrane for Enhanced Flexible Al–Air Batteries

An Ultra-Long-Life Flexible Lithium–Sulfur Battery with Lithium Cloth Anode and Polysulfone-Functionalized Separator