Abstract:Wearable electronics are one of the most rapidly growing industries, due to their extended use in everyday applications resulting in an increased demand for portable energy storage devices. Despite immense success in commercialization of Lithium-ion batteries (LIBs), conventional LIBs suffer from issues of cost and safety. The expanding need for cheaper, and safer energy storage devices led explorations towards alternatives. After careful considerations, Zinc (Zn)-Manganese dioxide (MnO 2 ) based alkaline system was chosen to be investigated in this work due to its low cost, inherent safety, and high theoretical energy density. However, challenges associated with making the aforementioned system rechargeable and highly performing still remains. The work in this study is directed towards enhancing the overall performance of the Zn-MnO 2 alkaline battery in addition to making it suitable for flexible and wearable applications. A highly ionically conducting polymer electrolyte ({5}CP) with excellent physical and electrochemical stability primarily comprising biopolymer chitosan is prepared by using a time and energy-efficient technique. Incorporation of this polymer electrolyte with Zn anode and MnO 2 cathode enabled the successful preparation of a physically flexible cell. To obtain high cyclability and performance of the system; issues of inactive phase formations (Mn x O y , ZnMn x O y ), low active material availability, pronounced shape changes at the anode surface, and zincate ion transfer towards cathode were overcome by enhancing the electrochemically active layers in the system. The assembled cell comprising the enhanced fabricated layers; (i.e. a Zinc/Stainless steel mesh composite anode, a hierarchical binder-free bismuth and copper additives based MnO 2 cathode, and a chitosan-based polymer electrolyte with calcium hydroxide additive) indicated excellent rate capabilities (486 mAh/g @ 0.1 A/g, 78% of the theoretical 2-electron capacity on MnO 2 ), long cycling stabilities (70% retention over 1000 cycles), and good energy densities (155 – 400 Wh/kg @ 0.1 – 1 A/g). Moreover, a number of destructive tests such as being bent, hammered, pressurized, and punctured were conducted on the pouch cell fabricated using the above-mentioned layers to analyze the cells' safety, reliability, and robustness. Results indicated not much deterioration in capacities. Additionally, when the cell was bent and tested for long performance; a stable discharge capacity (270 mAh/g @ 1 A/g) was obtained after 250 cycles, thus attesting to excellent cycling stability. The successful working of the fabricated cell was validated by lighting up an LED. The successful findings presented in this study can chart new pathways to the development of safe, flexible, cost-effective, and more environmentally responsible alternative energy storage sources for wearables.

Flexible and Safe Additives-Based Zinc-Binder-Free-Hierarchical MnO2 -Solid Alkaline Polymer Battery for Potential Wearable Applications.

(Invited) Flexible and Safe Zinc Alkaline Solid-State Rechargeable Battery for Wearable Applications

Flexible Fiber-Shape Zn-MnO2 Battery for Wearable Electronic Devices

Flexible Zinc-Manganese Dioxide Alkaline Batteries Based on Kelp Electrolytes

An extremely safe and wearable solid-state zinc ion battery based on a hierarchical structured polymer electrolyte

Achieving Ultrahigh Energy Density and Long Durability in a Flexible Rechargeable Quasi-Solid-State Zn-MnO 2 Battery.

Freestanding MXene‐Scaffolded Film Cathodes Enable High‐Performance Flexible Zinc‐Ion Batteries

High-performance flexible quasi-solid-state Zn–MnO2 battery based on MnO2 nanorod arrays coated 3D porous nitrogen-doped carbon cloth

A Highly Flexible and Lightweight MnO2/Graphene Membrane for Superior Zinc‐Ion Batteries

Binder-free flexible zinc-ion batteries: one-step potentiostatic electrodeposition strategy derived Ce doped-MnO2 cathode

A Mechanically Durable and Device-Level Tough Zn-MnO2 Battery with High Flexibility

The Design Of Flower-Like C-Mno2 Nanosheets On Carbon Cloth Toward High-Performance Flexible Zinc-Ion Batteries Dagger

In-Situ Encapsulating Metal Oxides into Core-Shell Hierarchical Hybrid Fibers for Flexible Zinc-Ion Batteries Towards High Durability and Ultrafast Capability for Wearable Applications.

Innovative Strategies Toward Compact, Highly Stretchable, and Fully Transient Primary Batteries with Enhanced Electrical Output for Wearable Electronics

A Highly Flexible and Lightweight MnO 2 /Graphene Membrane for Superior Zinc‐Ion Batteries

In Situ Encapsulating Metal Oxides into Core-Shell Hierarchical Hybrid Fibers for Flexible Zinc-Ion Batteries toward High Durability and Ultrafast Capability for Wearable Applications

A Highly Flexible and Lightweight MnO<sub>2</sub>/Graphene Membrane for Superior Zinc‐Ion Batteries

Graphene-oxide-modified MnO2 Composite Electrode for High-Performance Flexible Quasi-Solid-state Zinc-Ion Batteries

Recent advances in flexible alkaline Zinc-based batteries: Materials, structures, and perspectives

Dendrite-free Zinc Deposition Enabled by MXene/nylon Scaffold and Polydopamine Solid-Electrolyte Interphase for Flexible Zinc-Ion Batteries

A highly flexible and self-healable rechargeable fibrous Zn-MnO<sub>2</sub> battery