Abstract:A bipolar current collector with thin Cu and Al metal layers respectively deposited on each side of a polymer film is fabricated. The asymmetrical composite structure allows the all‐in‐one design of positve and negative electrodes to simplify the winding process in anode‐free batteries, exhibiting a higher coulombic efficiency (99.1%) during 100 cycles than that using Cu foil (91.9%). The all‐in‐one design of cathode and anode is a promising strategy to improve energy density and assembly efficiency for lithium batteries. However, it is an important prerequisite to combine negative and positive current collectors in a single sheet. Here, an asymmetric structure of bipolar composite current collector (BCCC), thin copper (Cu) and aluminum (Al) metal layers respectively deposited on each side of a thin polyethylene terephthalate (PET) polymer substrate is developed. Unlike conventional metal foils, the electronically insulative polymer blocks electron transfer between the cathode and anode coated on each side of BCCC. Buckling‐based mechanics measurement and molecular simulation are conducted to quantitatively evaluate the interfacial strength of metal/polymer, which is enhanced by introducing an intermediate chromium (Cr) layer. For applications in anode‐free wound batteries, the integrated sheet of separator/cathode/BCCC can simplify the alignment of the electrodes during the winding process. Without special surface and electrolyte optimizations, a higher Coulombic efficiency (99.1%) and larger capacity retention (50.0%) are achieved after 100 cycles in the LiNi0.8Co0.1Mn0.1O2 anode‐free battery than the battery using Cu foils.

Bipolar Current Collectors of Cu/polymer/Al Composite for Anode‐Free Batteries

Aligned carbon fibers–carbon nanotube–polymer–based composite as lithium-ion battery current collector

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

A 3D Cu current collector with a biporous structure derived by a phase inversion tape casting method for stable Li metal anodes

3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries

Lithiophilic and Anticorrosive Cu Current Collector via Dual-Bonded Porous Polymer Coating for Stable Lithium-Metal Batteries

An Ultralight Composite Current Collector Enabling High‐Energy‐Density and High‐Rate Anode‐Free Lithium Metal Battery

Rational design of highly conductive and stable 3D flexible composite current collector for high performance lithium-ion battery electrodes

Lightweight Polymer-Carbon Composite Current Collector for Lithium-Ion Batteries

Ultrathin Hierarchical Porous Cu Current Collector Fabricated by Anodic Oxidation in Complexing Agent System for Stable Anode-Free Lithium Metal Batteries

Metal‐Free Polymer‐Based Current Collector for High Energy Density Lithium‐Metal Batteries

Pulsed Current Constructs 3DM Cu/ZnO Current Collector Composite Anode for Free-Dendritic Lithium Metal Batteries

A New Process of Preparing Composite Microstructure Anode for Lithium Ion Batteries

Engineering Moderately Lithiophilic Paper-Based Current Collectors with Variable Solid Electrolyte Interface Films for Anode-Free Lithium Batteries

Super-three-dimensional Lithiophilic Cu-based Current Collector for Anode-free Lithium Metal Battery

Novel Current Collector for High Energy Density Lithium-Metal Batteries

Dynamic Adaptive Porous Cu Current Collector for Low N/P Ratio Li Metal Batteries

A facile method to fabricate lightweight copper coated polyimide film current collectors for lithium-ion batteries

Integrated Porous Cu Host Induced High‐Stable Bidirectional Li Plating/Stripping Behavior for Practical Li Metal Batteries

A novel composite anode for LIB prepared via template-like-directed electrodepositing Cu–Sn alloy process

Polymer@Cu composite foils with through-hole arrays as lightweight and flexible current collectors for lithium-ion batteries