Abstract:This study presents a comparison of the performance of machine learning (ML) techniques, specifically multi-dimensional gene expression programming (MGEP), tensor basis neural network (TBNN), and also proposes a novel universally interpretable machine learning architecture to model the turbulent scalar flux (UIML-s) to enhance turbulence models for fluid flows at different Prandtl numbers in channels with complex shapes of walls in the channel cross section. In particular, peripheral subchannels of rod bundles are of primary interest. However, the accuracy of mean velocity and scalar distributions predicted by commonly used turbulence models still poses a challenge compared to data extracted from high-fidelity eddy-resolving numerical simulations, particularly for engineering applications involving complex geometry flows. In the present study, by utilizing an explicit algebraic expression for the nonlinear Reynolds-stress term obtained through both the evolutionary MGEP optimization and TBNN, the secondary flow structure has been adequately predicted in the cross-wise mean velocity distributions in the square duct and the rectangular channel with three longitudinal rods. This structure is also observed in the data from the concurrent runs performed by direct numerical simulation (DNS) but is completely absent in the results produced by a baseline Reynolds-averaged Navier–Stokes (RANS) closure, which employs the linear eddy viscosity model for the Reynolds stress tensor. Comparison of MGEP and TBNN has shown their nearly equal performance in a square duct flow; however, MGEP works better for the more complex geometry channel with three rods. Furthermore, based on the velocity field produced by the RANS-MGEP model, the ML modification of the gradient diffusion hypothesis, integrated into the aforementioned novel RANS-ML model called as UIML-s, significantly improves the mean scalar distributions in a flow with three bumps serving as a prototype for the peripheral subchannel of rod bundle. The normalized root mean squared error decreases from 13.5% to 7.6%, bringing the predicted distributions closer to the DNS data, particularly in the near-wall region. Another approach, MGEP-s, also yields the acceptable results, which are nearly identical to those from UIML-s. These findings highlight the potential of using data-driven calibration of turbulence models with nonlinear closures to enhance the predictability for RANS simulations of fluid flows, heat, and mass transfer in channels with complex geometry.

Large eddy simulations of wall jets with coflow for the study of turbulent Prandtl number variations and data-driven modeling

Machine Learning Strategy for Wall Heat Flux Prediction in Aerodynamic Heating

Application of Artificial Fluid Properties for Stable and Accurate Large-Eddy Simulations of Compressible Turbulent Reactive Flows

Machine-learnt closure models based on computational space training frameworks for large-eddy simulations in natural convection

A-priori evaluation of data-driven models for large-eddy simulations in Rayleigh–Bénard convection

Non-dissipative large-eddy simulation of wall-bounded transcritical turbulent flows

Assessment of Machine Learning Wall Modeling Approaches for Large Eddy Simulation of Gas Turbine Film Cooling Flows: An a Priori Study

Data-driven model development for large-eddy simulation of turbulence using gene-expression programing

Machine learning building-block-flow wall model for large-eddy simulation

Data-driven turbulence modeling for fluid flow and heat transfer in peripheral subchannels of a rod bundle

Large Eddy Simulations of Turbulent Pipe Flows At Moderate-To-High Reynolds Numbers

Large eddy simulations of turbulent pipe flows at moderate Reynolds numbers

A novel data-driven method for augmenting turbulence modeling for unsteady cavitating flows

Data-driven Scalar-Flux Model Development with Application to Jet in Cross Flow

Exploring the Potential and the Practical Usability of a Machine Learning Approach for Improving Wall Friction Predictions of RANS Wall Functions in Non-equilibrium Turbulent Flows

A Total-Shear-stress-conserved Wall Model for Large-Eddy Simulation of High-Reynolds Number Wall Turbulence

Toward a flow-structure-based wall-modeled large-eddy simulation paradigm

Wall-modeled large-eddy simulation based on building-block flows

Wall-resolved and wall-modelled large-eddy simulation of plane Couette flow

A hybrid immersed boundary/wall-model approach for large-eddy simulation of high-Reynolds-number turbulent flows

Large Eddy Simulations of Fully-Developed Turbulent Flows Over Additively Manufactured Rough Surfaces