Abstract:To develop in-depth understanding of metallurgical phenomena for completeness, mechanical heterogeneity is kinetically and thermodynamically explained by thorough microstructure characterization of engineering materials, e.g. polycrystalline nickel-based superalloy, for alleviation of weldability-related problems during laser-induced keyhole fabrication. Because of nonequilibrium solidification behavior inside weld pool, finer γ phase dendrite substructure is confined to partition-resistant keyhole bottom part, coarser dendrite is crystallography-independently circumscribed at partition-vulnerable neck transition region of full penetration weld, and thus microstructure is lack of homogeneity. Abundance of segregation-driven eutectic phase or intermetallic phase in the interdendrite area throughout weld is essentially attributable to nonequilibrium solidification conditions, and morphologically increases susceptibility to mechanical properties deterioration. As a result of γ phase instability, Niobium-aided Laves/γ eutectic reaction in the vicinity of dendrite interstices at terminal stage of solidification contributes to severe dendrite boundaries brittleness, impairs mechanical properties, which is consistent with metallography and fractography results, and is more deleterious to weldability, since solute redistribution and supersaturation adversely exacerbate segregation behavior in the residual interdendrite liquid, especially asymmetric weld pool shape. There is inverse parabolic relationship between secondary dendrite arm spacing and solute partition coefficient, when location varies from nail-shaped weld upper site to bottom site. Chemical, microstructural and mechanical heterogeneities are more geometrically favorable in the curvature-related neck transition region. In addition, the mechanism of thermal, metallurgical and mechanical inhomogeneities, which are attributed to asymmetric weld pool shape, is consequently proposed. Untoward metallurgical phenomena, such as microstructure heterogeneity and brittle Niobium-rich Laves/γ eutectic phases mitigate strength, ductility and toughness of weld. In order to macroscopically and microscopically satisfy superior mechanical properties requirement, chemistry and microstructure of high quality weld are metallurgically controlled. Fruitful metallurgical information and mechanical data further support the reasonable explanations. It is imperative to progressively advance welding metallurgy, weldability and fabricability of intricate shape for welding defects minimization, suppress segregation and further develop mechanical properties through viable design and control of laser processing, simultaneously.

The Effect of Preliminary Laser Surface Treatment on the Mechanical Properties of a Solid-Phase Compound of an Iron-Nickel Alloy in Diffusion Welding

Laser heat treatment of steels and alloys before diffusion welding

Microstructural Characterization of the Laser Welding in a Nickel Based Superalloy

Diffusion-limited Nonequilibrium Phase Transformation of Nickel/Aluminum Dissimilar Materials during Laser Welding Part I: Precipitation-strengthened Polycrystalline Nickel-based Superalloy

Effect of Laser Heat Treatment on the Mechanical Performance and Microstructural Evolution of AISI 1045 Steel-2017-T4 Aluminum Alloy Joints during Rotary Friction Welding

Effect of welding parameters on weld surface roughness, hardness, and microstructure in laser-welded 340BH-steel and pure vanadium

Investigation the effect of dissimilar laser welding parameters on temperature field, mechanical properties and fusion zone microstructure of inconel 600 and duplex 2205 stainless steel via response surface methodology

Effect of laser pre-treatment on adhesive joint performance and evaluation of interfacial strain distribution using mechanoluminescence

Effect of process parameters on microstructure and properties of laser welded joints of aluminum/steel with Ni/Cu interlayer

Experimental studies on process-induced morphological characteristics of macro- and microstructures in laser consolidated alloys

Effect of laser welding parameters on the temperature distribution, microstructure and mechanical properties of dissimilar weld joint of Inconel 625 and stainless steel 304

Effect of Welding Speed on Microstructure and Mechanical Properties of Selective Laser Melting Inconel 625 Alloy Laser Welded Joint

Thermal, Metallurgical and Mechanical Determinants of Laminar Nickel/Aluminum Dissimilar Alloys during Laser-material Interaction Part I: Nickel-based Superalloy

Effect of Laser Surface Melting on Microstructure Evolution and Cavitation Behavior of Nickel Aluminum Bronze

Effect of heat input on microstructure and mechanical properties of laser welded joint of Inconel 617 nickel-based superalloy

Effect of welding speed on butt joint quality of laser powder bed fusion AlSi10Mg parts welded using Nd:YAG laser

Effect of Preliminary Ball Milling of Nanomodifiers on Their Efficiency in Laser Surface Treatment of Titanium

Dissimilar Laser Beam Welding of AISI 420 Martensitic Stainless Steel to AISI 2205 Duplex Stainless Steel: Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties

Effect of processing parameters on surface roughness, porosity and cracking of as-built IN738LC parts fabricated by laser powder bed fusion

Effect of asynchronized and synchronized laser shock peening on microstructure and mechanical properties of the Ti-6Al-4V laser joint

The Influence of Laser Welding Parameters on the Microstructure and Mechanical Property of the As-Jointed NiTi Alloy Wires