Abstract:In exploring the potential of agricultural waste as an efficient adsorbent, acid‐activated coconut husk biochar was prepared, characterized and applied to remove amoxicillin from wastewater. The mechanism of adsorption was also investigated through isotherm and kinetic studies. The biochar was activated with HNO 3 for 2 h at 25°C and investigated under varying experimental conditions of pH (1–11), initial amoxicillin concentration (0.5–2.5 mg/L), adsorbent dosage (2–20 mg) and contact time (0–24 h). The adsorption process was characterized by rapid attainment of adsorption equilibrium and high values of adsorption capacity. Acid activation had a significant impact on the adsorptive capacity of biochar as removal efficiency improved from 90% (over an hour) to 98.9% (within 40 min). The FTIR results confirmed the characteristic adsorption peaks of C‐H, =C‐H, C=C, C‐O, C=O and O‐H, suggesting the dominant presence of aromatic and carbonyl functional groups on the surface of the biochar. Adjustments in peak shapes and transmittance were observed for these functional groups after the adsorption; highlighting the likely interaction between the biochar and the amoxicillin during the adsorption which has been succinctly proposed. The SEM micrographs showed the growth of leaf‐like flakes of irregular shapes and pores essential for the adsorption. The rate and mechanism of adsorption were driven by the variable surface charge of the adsorbent and the degree of ionization of the adsorbates, which were largely controlled by the solution pH. Adsorption rates were highest in the acidic medium, peaking around a pH of 3, then remained relatively stable between pHs of 5 and 7 before reducing dramatically with increasing pH in the alkaline region. The adsorption best followed the Langmuir model of isotherm while the kinetics mimicked the pseudo–second order (PSO). The findings suggest that HNO 3 ‐activated coconut biochar is a promising, low‐cost and porous adsorbent effective for amoxicillin removal.

Green preparation of activated carbon from pomegranate peel coated with zero-valent iron nanoparticles (nZVI) and isotherm and kinetic studies of amoxicillin removal in water

Single-step pyrolysis of biomass waste-derived activated carbon encapsulated zero-valent nickel NPs for purification of antibiotic-contaminated water

Performance of iron nano particles and bimetallic Ni/Fe nanoparticles in removal of amoxicillin trihydrate from synthetic wastewater

Performance of magnetic nanocomposite based on xanthan gum-grafted-poly(acrylamide) crosslinked by borax for the effective elimination of amoxicillin from aquatic environments

Removal of Uranium(vi) from Aqueous Solution Using Nanoscale Zero-Valent Iron Supported on Activated Charcoal

Removal of Amoxicillin From Wastewater Onto Activated Carbon: Optimization of Analytical Parameters by Response Surface Methodology

A Sustainable Nanoporous Adsorbent for Reducing Amoxicillin in Pharmaceutical Wastewater: Magnetic Tea Waste Hydrochar

Removal of amoxicillin in aqueous solutions by a chemical activated carbons derived from Jujube nuts: adsorption behaviors, kinetic and thermodynamic studies

Green synthesis of nano-zero-valent iron from Nettle and Thyme leaf extracts and their application for the removal of cephalexin antibiotic from aqueous solutions

Green synthesis of Fe–Cu nanoparticles on multiwalled carbon nanotubes for amoxicillin removal from aqueous solution using walnut husk extract

Acid‐Activated Biochar for Efficient Elimination of Amoxicillin From Wastewater

Enhanced Removal of Antibiotic in Wastewater Using Liquid Nitrogen-Treated Carbon Material: Material Properties and Removal Mechanisms

Application of powdered activated carbon coated with zinc oxide nanoparticles prepared using a green synthesis in removal of Reactive Blue 19 and Reactive Black-5: adsorption isotherm and kinetic models

Removal of nitrate nitrogen from wastewater by green synthetic hydrophilic activated carbon supported sulfide modified nanoscale zerovalent Iron: Characterization, performance and mechanism

Green Synthesis of Nanoscale Zero-Valent Iron/Activated Carbon Composites and their Application for Copper and Chromium Removal from Aqueous Solutions

Exploratory study of removing nutrients from aqueous environments employing a green synthesised nano zero-valent iron

Removal of amoxicillin from aqueous solution using sludge-based activated carbon modified by walnut shell and nano-titanium dioxide

Adsorption Dynamics and Mechanism of Amoxicillin and Sulfachlorpyridazine by ZrOx/porous Carbon Nanocomposites

Efficient removal of pharmaceutical contaminants from water and wastewater using immobilized laccase on activated carbon derived from pomegranate peels

Paracetamol and amoxicillin adsorptive removal from aqueous solution using phosphoric acid activated-carbon

Effectiveness of Artificially Synthesized Granitic Residual Soil-Supported Nano Zero-Valent Iron (Gr-nZVI) as Effective Heavy Metal Contaminant Adsorbent