Abstract:p-nitrophenol (pNP) is a highly toxic organic compound and is considered carcinogenic and mutagenic. It is a very stable compound with high resistance to chemical or biological degradation. As a result, the elimination of this pollutant has been very challenging for many researchers. Catalytic reduction is one of the most promising techniques, if a suitable catalyst is developed. Thus, this work aims to prepare an eco-friendly catalyst via a simple and low-cost route and apply it for the conversion of the toxic p-nitrophenol (pNP) into a non-toxic p-aminophenol (pAP) that is widely used in industry. Manganese oxide was prepared in an environmentally friendly manner with the aid of Lawsonia inermis (henna) extract as a stabilizing and capping agent and loaded on the surface of 13X molecular sieve zeolite. The UV-Vis spectrum, EDS, and XRD patterns confirmed the formation of the pure MnO2 loaded on the zeolite crystalline network. The TGA analysis showed that the samples prepared by loading MnO2 on zeolite (Mn2Z, Mn3Z, and Mn4Z) lost more mass than pure MnO2 (Mn) or zeolite (Z), which is mainly moisture adsorbed on the surface. This indicates a better dispersion of MnO2 on the surface of zeolite compared to pure MnO2, and thus a higher number of active adsorption sites. SEM images and EDS confirmed the dispersion of the MnO2 on the surface of the zeolite. Results showed a very fast reduction rate, following the order Mn2Z > Mn3Z > Mn4Z > Mn > Z. With sample Mn2Z, 96% reduction of pNP was achieved in 9 min and 100% in 30 min. For Mn3Z, Mn4Z, and Mn, 98% reduction was achieved in 20 min and 100% in 30 min. Zeolite was the slowest, with only a 40% reduction in 30 min. Increasing the amount of zeolite in the synthesis mixture resulted in lower reduction efficiency. The kinetic study indicated that the reduction of p-nitrophenol on the surface of the prepared nanocomposite follows the pseudo-first-order model. The results show that the proposed nanocomposite is very effective and very promising to be commercially applied in water treatment, due to its low cost, simple synthesis procedure, and reusability.

Single-step pyrolysis of biomass waste-derived activated carbon encapsulated zero-valent nickel NPs for purification of antibiotic-contaminated water

Porous Carbon Aerogel Derived from Bacterial Cellulose with Prominent Potential for Efficient Removal of Antibiotics from the Aquatic Matrix

Reuse of Waste Materials as Precursors of Activated Carbon Synthesis for the Abatement of Antibiotic Cefpodoxime Proxetil from Industrial Effluents.

Green preparation of activated carbon from pomegranate peel coated with zero-valent iron nanoparticles (nZVI) and isotherm and kinetic studies of amoxicillin removal in water

Heterogeneous porous biochar-supported nano NiFe2O4 for efficient removal of hazardous antibiotic from pharmaceutical wastewater

Efficient removal of E. coli from wastewater by novel phytofabricated nano-zinc using antibacterial potential, kinetic studies, and response surface methodology

In-situ preparation of N-rich nano-activated carbon on negative-charged montmorillonite with enhanced activation of peroxymonosulfate for antibiotics degradation

Reduction of Biological Contaminants from Municipal Wastewater by Encapsulated nZVI in Alginate (Ag) Polymer: Reduction Mechanism with Artificial Intelligence Approach

Exploration of the degradation mechanism of ciprofloxacin in water by nano zero-valent iron combined with activated carbon and nickel

Effect of pyrolysis temperature on characteristics and chloramphenicol adsorption performance of NH 2 -MIL-53(Al)-derived amine-functionalized porous carbons

Application potential of zero-valent aluminum in nitrophenols wastewater decontamination: Enhanced reactivity, electron selectivity and anti-passivation capability

A novel strategy for efficient utilization of carbon residue from biomass gasification loaded NiCo 2 O 4 to construct composite catalysts for activation of peroxymonosulfate to effectively remove antibiotics

Waste to resource: Engineered ridge gourd peel‐based activated carbon for enhanced cephalexin adsorption

Using waste to treat waste: facile synthesis of hollow carbon nanospheres from lignin for water decontamination

Novel N-doped Hierarchically Porous Carbons Derived from Sustainable Shrimp Shell for High-Performance Removal of Sulfamethazine and Chloramphenicol

Efficient Removal of Nickel from Wastewater Using Copper Sulfate-Ammonia Complex Modified Activated Carbon: Adsorption Performance and Mechanism

Utilizing Hydrothermally Carbonized Food Waste-Derived Activated Hydrochar for the Elimination of Carbamazepine and Naproxen

High Capacity of Oxytetracycline Hydrochloride Removal in Wastewater Via Mikania Micrantha Kunth-Derived Biochar Modified by Zn/Fe-Ldh

Nanocomposites of immobilized nano-zirconia on low-cost activated carbon derived from hazelnut shell for enhanced removal of 3-Nitro-4-Hydroxy-Phenylarsonic acid from water

Catalytic Reduction of p-Nitrophenol on MnO2/Zeolite -13X Prepared with Lawsonia inermis Extract as a Stabilizing and Capping Agent

A Hybrid Nanocomposite of Silver Nanoparticles Embedded with End-of-Life Battery-Derived Sheets-Like Nitrogen and Sulfur-Doped Reduced-Graphene Oxide for Water Treatment and Antimicrobial Applications