Abstract:p-nitrophenol (pNP) is a highly toxic organic compound and is considered carcinogenic and mutagenic. It is a very stable compound with high resistance to chemical or biological degradation. As a result, the elimination of this pollutant has been very challenging for many researchers. Catalytic reduction is one of the most promising techniques, if a suitable catalyst is developed. Thus, this work aims to prepare an eco-friendly catalyst via a simple and low-cost route and apply it for the conversion of the toxic p-nitrophenol (pNP) into a non-toxic p-aminophenol (pAP) that is widely used in industry. Manganese oxide was prepared in an environmentally friendly manner with the aid of Lawsonia inermis (henna) extract as a stabilizing and capping agent and loaded on the surface of 13X molecular sieve zeolite. The UV-Vis spectrum, EDS, and XRD patterns confirmed the formation of the pure MnO2 loaded on the zeolite crystalline network. The TGA analysis showed that the samples prepared by loading MnO2 on zeolite (Mn2Z, Mn3Z, and Mn4Z) lost more mass than pure MnO2 (Mn) or zeolite (Z), which is mainly moisture adsorbed on the surface. This indicates a better dispersion of MnO2 on the surface of zeolite compared to pure MnO2, and thus a higher number of active adsorption sites. SEM images and EDS confirmed the dispersion of the MnO2 on the surface of the zeolite. Results showed a very fast reduction rate, following the order Mn2Z > Mn3Z > Mn4Z > Mn > Z. With sample Mn2Z, 96% reduction of pNP was achieved in 9 min and 100% in 30 min. For Mn3Z, Mn4Z, and Mn, 98% reduction was achieved in 20 min and 100% in 30 min. Zeolite was the slowest, with only a 40% reduction in 30 min. Increasing the amount of zeolite in the synthesis mixture resulted in lower reduction efficiency. The kinetic study indicated that the reduction of p-nitrophenol on the surface of the prepared nanocomposite follows the pseudo-first-order model. The results show that the proposed nanocomposite is very effective and very promising to be commercially applied in water treatment, due to its low cost, simple synthesis procedure, and reusability.

Catalytic Reduction of p-Nitrophenol on MnO2/Zeolite -13X Prepared with Lawsonia inermis Extract as a Stabilizing and Capping Agent

Layered CuNi-Cu2O/NiAlOx Nanocatalyst for Rapid Conversion of P-Nitrophenol to P-Aminophenol

High-efficient Catalytic Reduction of 4-Nitrophenol Based on Reusable Ag Nanoparticles/graphene-Loading Loofah Sponge Hybrid.

Facile Synthesis of MCM-41/nano Zero-Valent Iron Composite for Catalytic Reduction of P-Nitrophenol

Catalytic Reduction of Nitrophenol and MB Waste Water Using Homogeneous Pt NPs Confined in Hierarchically Porous Silica

Palladium Nanoparticles Decorated on ZSM-5 Derived Micro-/Mesostructures (MMZ) for Nitrophenol Reduction and MB Degradation in Water

Iron-Pillared Montmorillonite As An Inexpensive Catalyst For 2-Nitrophenol Reduction

Catalytic Reduction–adsorption for Removal of P-Nitrophenol and Its Conversion P-Aminophenol from Water by Gold Nanoparticles Supported on Oxidized Mesoporous Carbon

Alkalized MXene-supported Nanoscale Zero-Valent Iron in Situ Derived from NH2-MIL-88B(Fe) for the Highly Efficient Catalytic Reduction of 4-Nitrophenol

Ultrafine Silver Nanoparticles Supported On A Covalent Carbazole Framework As High-Efficiency Nanocatalysts For Nitrophenol Reduction

Ionic Liquid Covered Iron-Oxide Magnetic Nanoparticles Decorated Zeolite Nanocomposite for Excellent Catalytic Reduction and Degradation of Environmental Toxic Organic Pollutants and Dyes

Microwave-assisted Hydrothermal Synthesis of Mn 3 O 4 /reduced Graphene Oxide Composites for Efficiently Catalytic Reduction of 4-Nitrophenol in Wastewater

Nickel foam supported non-noble Co 3 O 4 as monolithic membrane catalyst for the reduction of p-nitrophenol

Pd Nanoparticle-Decorated 3d-Printed Hierarchically Porous Tio2 Scaffolds For The Efficient Reduction Of A Highly Concentrated 4-Nitrophenol Solution

Enhanced Mineralization of Nitrophenols by a Novel C@ZVAl-PS Based Sequential Reduction-Oxidation Process

Pt Nanoparticles Supported on Ultrathin Ni(OH)2 Nanosheets for Highly Efficient Reduction of 4-Nitrophenol

Low-Ag-content Ni3N-Ni/Ag@C Catalyst for the Reduction of 4-Nitrophenol

Facile Synthesis of Natural Kaolin-Based CuO Catalyst: An Efficient Heterogeneous Catalyst for the Catalytic Reduction of 4-Nitrophenol

Facile Preparation of Highly Dispersed Pt Nanoparticles Supported on Heteroatom-Containing Porous Carbon Nanospheres and Their Catalytic Properties for the Reduction of 4-Nitrophenol

High-Performance Catalytic Reduction of 4-Nitrophenol to 4-Aminophenol over Pt Nanoparticles Supported on Co-Al LDH Nanosheets

Cu Nanoparticles Confined Within ZSM-5 Derived Mesoporous Silica (MZ) with Enhanced Stability for Catalytic Hydrogenation of 4-Nitrophenol and Degradation of Azo Dye