Abstract:The removal and degradation of organic/inorganic pollutants from aqueous solutions have stimulated the interest of researchers in recent years using heterogeneous adsorbent nanocatalysts. In this study, the coupled CuO/Fe3O4 nanocomposite (NC) was prepared at one step with a simple, cost-effective, and eco-friendly method by Adiantum C.V leaf extract as a reducing agent. The crystallite sizes for the CuO and CuO/Fe3O4 samples were obtained of XRD results by the Williamson–Hall equation (about 32.26 and 24.49 nm) and the Scherrer equation (about 22.37 and 23.97 nm), respectively. The EDS results from CuO/Fe3O4 NCs indicated a mole ratio of 1:2 for CuO/Fe3O4. Catalytic activity studies of green synthesized CuO/Fe3O4 NCs (dosage: 0.1 g/L) have shown high removal efficiency for both methyl orange (MO) (1.2 × 10–5 M) and Cr(VI) (3.0 × 10–3 M) pollutants at alkaline pHs between a range of (3 and 10) with a contact time of about 110 min. The degradation extent of the MO and Cr(VI) pollutants was estimated by changes in the UV–vis absorbances set to at λmax = 465 and 542 nm, respectively. Adsorption kinetics for the degradation of both investigated pollutants followed the pseudo-first-order kinetics model. The kinetic result showed degradation rate was increased toward the increase in pH (3–10) and temperature (293–308 K). The calculated thermodynamic parameters (∆G°, ∆H°, and ∆S°) demonstrate that the adsorption of MO and Cr(VI) on the surface of green NCs is thermodynamically possible and spontaneous as temperature rises. Therefore, the present approach provides a potential method for preparing heterogeneous nanocatalysts for a wide range of applications in the degradation and reduction in organic/inorganic pollutants. In addition, the antibacterial effect of nanomaterials against gram-positive and gram-negative bacteria was tested at different concentrations of NCs (0.001–0.025 g/mL), which was in good agreement with the catalytic adsorption results for the degradation of both pollutants due to generated free radicals in aqueous solution.Graphical abstractSchematic of the possible mechanisms for the removal of MO dye and Cr(VI) metal ions from the aqueous solutions at different temperatures and pHs, using green synthesized CuO/Fe3O4 NCs by Adiantum C.V leaf extract in the present NaBH4.

Green synthesis of Fe–Cu nanoparticles on multiwalled carbon nanotubes for amoxicillin removal from aqueous solution using walnut husk extract

Easy solid-phase synthesis of pH-insensitive heterogeneous CNTs/FeS Fenton-like catalyst for the removal of antibiotics from aqueous solution.

Facile Method for the Synthesis of a Magnetic CNTs-C@Fe-chitosan Composite and Its Application in Tetracycline Removal from Aqueous Solutions.

Green Synthesis of Fe–Cu Bimetallic Supported on Alginate-Limestone Nanocomposite for the Removal of Drugs from Contaminated Water

Highly operative removal of amoxicillin (AMX) from aqueous solution by MnFe 2 O 4 nanoparticles and carboxy methyl cellulose (CMC) composite

Preparation of Amino-Fe(iii) Functionalized Mesoporous Silica for Synergistic Adsorption of Tetracycline and Copper.

Carbon-Supported Nanocomposite Synthesis, Characterization, and Application as an Efficient Adsorbent for Ciprofloxacin and Amoxicillin

Enhanced Removal of Antibiotic in Wastewater Using Liquid Nitrogen-Treated Carbon Material: Material Properties and Removal Mechanisms

Synthesis of Iron and Cobalt Oxide Nanocatalysts with Various Molar Ratios and Their Application for Antibiotic Removal from Aqueous Solutions

Procedure Optimization for Green Synthesis of Magnetic‐Copper Nanoparticles by Aqueous Alcea Medicinal Plant Extract and Their Photocatalytic Properties

Methionine-stevensite derived bionanocomposite: A green and efficient adsorbent for the removal of antibiotics

Green synthesis of copper oxide nanoparticles and its efficiency in degradation of rifampicin antibiotic

Facile synthesis of Cu NPs@Fe3O4-lignosulfonate: Study of catalytic and antibacterial/antioxidant activities

A Sustainable Nanoporous Adsorbent for Reducing Amoxicillin in Pharmaceutical Wastewater: Magnetic Tea Waste Hydrochar

Performance of iron nano particles and bimetallic Ni/Fe nanoparticles in removal of amoxicillin trihydrate from synthetic wastewater

Investigation and characterization of biosynthesized green adsorbent CuO NPs and CuO/Fe3O4 NCs using Adiantum C.V leaf for removal MO dye and Cr(VI) metal ions: thermodynamic, kinetic, and antibacterial studies

Green stabilization of silver nanoparticles over the surface of biocompatible Fe3O4@CMC for bactericidal applications

Synthesis of reduced graphene oxide supported FeCu and its environmental applications

Efficient Removal of Antibiotics From Water via a Novel Magnetic Hypercrosslinked Polymer

Efficient and Effective Immobilization of Tetracycline and Copper from Wastewater by Zero-Valent Iron Fabricated Hydrochar Derived from Walnut Peel

Heterogeneous porous biochar-supported nano NiFe2O4 for efficient removal of hazardous antibiotic from pharmaceutical wastewater