Abstract:Thermodynamic analysis is applied to the kerosene fuelled high by‐pass turbofan (HBP‐TF) engine to assess entropy, exergy, environmental and sustainability metrics for different design variables. As a novelty, entropic improvement potential index for turbomachinery components and specific irreversibility production for the whole engine are computed. Sustainability‐based parameters for different cases are compared with the baseline values of HBP‐TF engine. In this study, thermodynamic analysis is implemented to the kerosene‐fuelled high by‐pass turbofan (HBP‐TF) engine to assess entropy, exergy, environmental, and sustainability metrics for different design variables such as pressure ratio of high‐pressure compressor (HPC‐PR) ranging from 7.5 to 8.5 and turbine inlet temperature (TIT) varying from 1400 to 1525 K considering variable needs in the aviation industry. As a novelty, entropic improvement potential (EIP) index for turbomachinery components and specific irreversibility production for the whole engine are calculated. Sustainability‐based parameters for different cases are compared with the baseline values of the HBP‐TF engine. The combustor has the highest entropy production of 44.4425 kW K−1 at the baseline. The higher TIT increases the entropy production of the combustor by 16.56%, whereas the higher HPC‐PR decreases it by 5.83%. The higher TIT and HPC‐PR favorably affect the sustainable efficiency factor of the engine, which is observed as 1.5482 at baseline and increases by 4.5% and 0.058% with the increment of TIT and HPC‐PR, respectively. The higher TIT and higher HPC‐PR results in lowering sustainability of the engine. The specific irreversibility production of the engine decreases by 3.78% and 0.1171% respectively, as TIT and HPC‐PR reach the highest point considered in the study.

Comparing different piston-prop aircraft engines with combustion efficiency and exergy

Exergy analysis on throttle reduction efficiency based on real gas equations

Exergy analysis of a turboprop engine at different flight altitude and speeds using novel consideration

Conceptual Design and Optimization of Scramjet Engines Using the Exergy Method

Energetic and exergetic metrics of a cargo aircraft turboprop propulsion system by using regression method for dynamic flight

Performance analysis of solid oxide fuel cell/piston engine hybrid system for aviation

The Effect of Crankshaft Phasing and Port Timing Asymmetry on Opposed-Piston Engine Thermal Efficiency

Generalized Thermodynamic Assessment of Concepts for Increasing the Efficiency of Civil Aircraft Propulsion Systems

Comparative thermodynamic, environmental and sustainability performance assessments of an aero turboprop engine utilizing jet fuel and biofuel

Propeller effects on energy, exergy and sustainability parameters of a small turboprop engine

Thermodynamic-based environmental and enviroeconomic assessments of a turboprop engine used for freight aircrafts under different flight phases

Thermodynamics, Environmental and Sustainability Impacts of a Turbofan Engine Under Different Design Conditions Considering Variable Needs in the Aviation Industry

Combustion and emission characteristics of a compression ignition engine burning a wide range of conventional hydrocarbon and alternative fuels

Environmental damage cost and exergoenvironmental evaluations of piston prop aviation engines for the landing and take-off flight phases

Advanced Exergy and Graphical Exergy Analyses for Solid Oxide Fuel Cell Turbine-Less Jet Engines

Quantitative comparison of the operating characteristics and engine performances of typical configurations of free-piston engine linear generator

What fuel properties enable higher thermal efficiency in spark-ignited engines?

Thermodynamic Performance Comparisons of Ideal Brayton Cycles Integrated with High Temperature Fuel Cells As Power Sources on Aircraft

Identification of Potential Efficiency Opportunities in Internal Combustion Engines Using a Detailed Thermodynamic Analysis of Engine Simulation Results

Efficiency at maximum power output for an engine with a passive piston

Comparative Study of Combustion and Emissions of Kerosene (Rp-3), Kerosene-Pentanol Blends and Diesel in A Compression Ignition Engine