Abstract:The ever increasing consumption of non-renewable fossil fuels for global economic development leads to serious energy crisis and environmental pollution. Consequently, new alternative fuels and high-efficiency combustion are required to aid the sustainable development of human society. The present paper took the RP-3 aviation kerosene and coal-to-liquid synthetic aviation fuel (manufactured through the Fischer Tropsch process., FT) for object, and experimentally investigated the influences of pressure, inlet temperature and equivalence ratio on the productions of NOx and CO in a jet stirred combustion reactor. The tests were performed under the pressures of 2bar and 3bar, and inlet air temperatures of 550K and 650K, respectively. The equivalence ratio ranged from 0.5 to 1.2. The mean residence time was approximately 8ms. Probe sampling followed by on-line emissions analyzer permitted to measure the concentration of the products. The experimental results show that these two fuels obey the same law with the variations of pressures, inlet temperatures and equivalence ratios. The NOx production increases with the pressure and inlet temperature increasing. The CO decreases with the pressure increasing, while slightly increases with the inlet temperature increasing. Numerical simulations were also performed to investigate the combustion products of these two fuels in the jet stirred combustion reactor. Two PSRs were introduced to simulate the jet flame region and post flame in the recirculation region, respectively. The combustion products of second PSR (PSR2) agreed well with the experimental results by regulating the volume ratio of first PSR (PSR1). Based on the reaction pathway analysis of NO production in present state, it is considered that for these two fuels the NOx production is led by the thermal NO above the equivalence ratio of 0.65, while by the N2O at lower equivalence ratios. With the application of the present alternative fuel and its reaction mechanism, the experimental results of aviation kerosene and Coal-to-Liquid synthetic aviation fuel can be predicted well within a certain state, which requires a further verification in a wider range. Furthermore, the numerical results show that the NO release is insensitive to the reaction components within present experimental states.

Combustion and emission characteristics of a compression ignition engine burning a wide range of conventional hydrocarbon and alternative fuels

Characterizing Combustion Performance and PM Emissions of an Aviation Compression Ignition Engine by Fueling RP-3 Kerosene and RP-3/pentanol Blends

Applying Fischer Tropsch and Its Pentanol Blends into an Aviation Compression Ignition Engine for PM Emissions Control

Combustion Analysis of an Aviation Compression Ignition Engine Burning Pentanol–Kerosene Blends under Different Injection Timings

Comparative Study of Combustion and Emissions of Kerosene (Rp-3), Kerosene-Pentanol Blends and Diesel in A Compression Ignition Engine

Sensitivity Analysis of Fuel Types and Operational Parameters on the Particulate Matter Emissions from an Aviation Piston Engine Burning Heavy Fuels

Investigation of Engine Performance for Alcohol/kerosene Blends As in Spark-Ignition Aviation Piston Engine

Combustion Performance Investigation of Aviation Kerosene (RP-3) on a Compression Ignition Diesel Engine under Various Loads

Experimental Investigation on Combustion and Emissions of a Two-Stroke DISI Engine Fueled with Aviation Kerosene at Various Compression Ratios

Fuel Flexibility Potential for Isobaric Combustion in a Compression Ignition Engine: A Computational Study

Influence Of Acetone-Butanol-Ethanol (Abe)-Gasoline Blends On Regulated And Unregulated Emissions From A Pfi Si Engine

Experimental Investigation on the Performance of an Aviation Piston Engine Fueled with Bio-Jet Fuel Prepared via Thermochemical Conversion of Triglyceride

Effects of Injection Timing and Compression Ratio on the Combustion Performance and Emissions of a Two-Stroke DISI Engine Fuelled with Aviation Kerosene

Experimental Study On Nox And Co Emissions Of Aviation Kerosene And Coal-To-Liquid Synthetic Aviation Fuel In A Jet Stirred Combustion Reactor

Combustion and Emissions of RP-3 Jet Fuel and Diesel Fuel in a Single-Cylinder Diesel Engine

The Impact of Fuel and Injection Strategy on Combustion Characteristics, Emissions and Efficiency in Gasoline Compression Ignition Operation

Engine performance and emissions of furan-series biofuels under stratified lean-burn combustion mode

Experimental Study of the Gaseous and Particulate Matter Emissions from a Gas Turbine Combustor Burning Butyl Butyrate and Ethanol Blends

Experimental study on the application of n-butanol and n-butanol/kerosene blends as fuel for spark ignition aviation piston engine

Empirical Modeling of Synthetic Fuel Combustion in a Small Turbofan

Study of Scavenging and Combustion Processes for Small Two-Stroke Aviation Heavy Fuel Direct Injection Engines