Abstract:Two types of warheads were used to carry out high‐speed impact experiments on four kinds of laminated fiber‐metal laminates. In this work, the failure mode and ballistic protection capability of the carbon fiber aluminum alloy laminated target plate under the impact of high‐speed projectile body were studied by ballistic impact test. The effects of the lamination sequence and warhead shape difference on the impact resistance of the laminated aluminum alloy and carbon fiber laminates were analyzed. Two kinds of projectile bodies, flat and oval head, were used to carry out multiple high‐speed impact experiments on four groups of targets with different stacking sequences. By analyzing the result, it is found that the lamination sequence of the target plate has a significant effect on the anti‐impact performance only when the flat head projectile impacts, while the ovoid projectile has almost no effect. In the fiber‐metal composite configuration, the aluminum plate placed in front of the carbon fiber plate showed the best resistance to flat head bullet impact, the ballistic limit speed reached 135 m/s, and the overall impact resistance improved by up to 26% compared with other configurations. Unlike the shear failure caused by flat head projectile, ovoid projectile impact can cause serious tensile and tear damage. Based on the experimental results, it is clear that the laminated structure has better penetration resistance against the flat head projectile, and the placement of aluminum plate on the impact surface can change the failure mode of carbon fiber laminates and improve the energy absorption level of composite plates. Highlights Unlike traditional fiber‐metal laminates, the target plate used in this experiment does not use adhesive, which makes the deformation of the two materials will not affect each other, which is conducive to the study of its own impact resistance. The mechanical behavior and damage failure mode of the target plate under high speed impact load were studied. The impact of ovoid projectile changes the damage failure mode of the target plate. For the configuration of fiber‐metal laminates, the ballistic limit value is as low as 100 m/s, and the energy absorption value fluctuates in the range of 145–190 J with the change of impact velocity. Compared with ovoid projectile, laminated material has stronger impact resistance to flat head projectile. The metal plate arranged on the impact surface can change the damage mode from shear failure to tensile failure, thus greatly improving the ballistic limit and impact resistance, overall impact resistance can be improved by up to 26%.

Dynamic response characteristics of hybrid fiber metal laminates under inclined impact

Numerical Study on the Energy Absorption and Damage Characteristics of Aluminum Alloy Carbon/Glass Fiber Laminates under Different Impact Velocities

Cross-helicoidal Approach to the Design of Damage-Resistant Composites

Study of Low-Velocity Impact Behavior of Hybrid Fiber-Reinforced Metal Laminates

Analysis on the impact response of fiber-reinforced composite laminates: an emphasis on the FEM simulation

Low Velocity Impact Response of Carbon Fiber Composite Laminates with Surface Glass Fibers

Finite element analysis of dynamic progressive failure properties of GLARE hybrid laminates under low-velocity impact

Numerical and experimental investigation on the oblique successive impact behavior and accumulated damage characteristics of fiber metal laminates

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Soft impact of GLARE fiber metal laminates

Nonlinear analysis model of the progressive damage of aluminum–wood sandwich structures under high-speed impact conditions

Insights into the high-velocity impact behaviour of bio-inspired composite laminates with helicoidal lay-ups

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Study of the dynamic response and damage evolution of carbon fiber/ultra-thin stainless-steel strip fiber metal laminates under low-velocity impact

Effect of Z-pin Insertion Angles on Low-Velocity Impact Mechanical Response and Damage Mechanism of CFRP Laminates with Different Layups

Finite element analysis and energy recovery calculation of carbon fiber composite based on ANSYS software

Simulation on Impact Response of FMLs: Effect of Fiber Stacking Sequence, Thickness, and Incident Angle

An analytical model to predict the impact of a bullet on ultra-high molecular weight polyethylene composite laminates

Effect of lamination sequence and warhead shape on impact resistance of fiber‐metal laminates

Experimental and numerical response and failure of laterally impacted carbon/glass fibre-reinforced hybrid composite laminates

Energy dissipation mechanism of fiber metal laminate under low-velocity impact