Abstract:When conducting retreat mining in segmented coal pillars, the dynamic evolution of stress and overlying strata structure is more complex than conventional working faces due to the influence of adjacent working faces. Understanding and mastering the dynamic evolution patterns of overlying strata structure after retreat mining in segmented coal pillar working faces is essential for guiding the safe recovery of coal pillar resources under similar conditions. Through statistical analysis of the types of residual coal and the mining techniques, the current research status of residual coal mining system in China has been summarized. Based on the safety recovery technology system for multi-type residual coal pillar resources at Zhaogu No.2 Mine, this paper focuses on narrow coal pillar working faces in sections with fully mined-out areas on both sides. By using research methods such as on-site measurement, theoretical analysis, numerical simulation, and engineering experiments, starting from the stress state analysis and evolution law of coal seam mining, the dynamic evolution law of the overlying rock structure of sectional coal pillars has been mastered. On this basis, a stress arch mechanical model of the mining area is constructed, and the working resistance of the support is calculated and determined, ensuring the safe recovery of the working face. The research results show that before the backfilling of the sectional coal pillar working face, the working face is affected by the overlapping mining of the goaf on both sides, presenting a "bimodal" stress distribution pattern, with a stress concentration coefficient between 1.78 and 3.2. After the extraction of segmented coal pillars, stress arches consisting of high-stress zones form along both the strike and dip of the working face. The structural support provided by stress arches undergoes a dynamic evolution process of "formation-development-elevation-stabilization" as the working face advances. Following the instability and rupture of the lower basic roof hinge structure, the stress-bearing structure shifts to the higher basic roof, continuing to provide support for the surrounding rock stress in the mining space of the working face. A stress arch mechanical model for the dip and strike of the mining area is constructed , and the shape characteristics of the overlying rock stress arch in the coal pillar working face is mastered. Based on the stress distribution law and stress arch evolution characteristics of the surrounding rock of the coal pillar working face, the maximum working resistance of the support in the working face is theoretically calculated to be 9153.48kN. Compared with the measured mine pressure data, the selected support effectively ensures the safety production of the working face.

Research on Roof Management Technology of Mining in Shallow Buried Coal Seam use Continuous Miner

Principle and practice of hydraulic softening top-cutting and pressure relief technology in weakly cemented strata

A Field Study Implementing New Monitoring Technology for Roof Caving and Systematic Monitoring for Gob-Side Entry Retaining via Roof Cutting in Underground Coal Mining

The Roof Safety under Large Mining Height Working Face: A Numerical and Theoretical Study

Study on Pressure Characteristics and Roof Subsidence Law of Narrow Strip Filling Mining

Research on Roof Weighting Mechanism of Coal Pillar Mining in Shallow Buried Closely Spaced Multi-seams

Study on surface subsidence prediction method of shallow coal seam backfill-strip mining under the hard roof

Application of Pre-Splitting and Roof-Cutting Control Technology in Coal Mining: A Review of Technology

A study on the mechanism and control technology of strong mine pressure in parallel coal pillar and hard roof mining

Study on the Spatiotemporal Dynamic Evolution Law of a Deep Thick Hard Roof and Coal Seam

Surface Subsidence Prediction Method for Backfill Mining in Shallow Coal Seams with Hard Roofs for Building Protection

Innovation and future of mining rock mechanics

Study on the damage characteristics of overburden of mining roof in deeply buried coal seam

The sustainable development of coal mines by new cutting roof technology

A Three-Dimensional Supporting Technology, Optimization and Inspiration from a Deep Coal Mine in China

Research on Roof Load Transfer by Passing Coal Pillar of Working Face in Shallow Buried Closely Multiple-Seam

Key Technology Research on the Rapid-Molding In-Closed Retaining-Wall in Filling Mining

Study on roof breaking mechanism and support stability of steeply dipping seam and large mining height

Study on the Partial Paste Backfill Mining Method in a Fully Mechanized Top-Coal Caving Face: Case Study from a Coal Mine, China

Safety and high-recovery mechanisms and application research for initial mining of thick-coal-seam with complex structure and thick-hard roof

Breaking law of overburden rock and key mining technology for narrow coal pillar working face in isolated island