Abstract:One of the primary factors affecting safe and effective mining in fully mechanized mining faces with large mining heights is coal wall sloughing. This paper establishes the mechanical model of the coal wall and uses the deflection theory for the mechanics of materials to find the maximum point of the deflection of the coal wall, which is the most easily deformed and damaged during the mining process, based on the mining production conditions of the 12-2up108 working face in the Jinjitan Coal Mine. In order to simulate the characteristics of the coal wall in the large mining height working face at various mining heights, the FLAC-3D numerical method was used. The stability of the mining area was assessed in conjunction with the multi-factor fuzzy comprehensive evaluation mathematical model, and the corresponding control of the coal wall was suggested. The study demonstrates that: (1) The working surface at Jinjitan Coal Mine 112-2up108 is a typical drum-out sloughing. The coal wall is most likely to sustain damage at the point where it contacts the roof when the frictional resistance between the coal seam and the roof and floor is less than the uniform load, and at 0.578 times the mining height when the frictional resistance between the coal seam and the roof and floor is greater than the uniform load. (2) In the working face with a large mining height, mining height of the coal wall is one of the significant influencing factors. With increasing mining height, the coal wall's height also rises nonlinearly, as does the depth of the coal wall in the working face with the large mining height. The growth is linear. The coal wall's maximum deflection value point moves up and the slab's height significantly increases when the mining height exceeds 7.5 m. (3) The Jinjitan Coal Mine should be supported by a pressurized and enhanced composite support bracket with a support force greater than 0.245 MPa and a support plate of 3500 mm because it belongs to a Class I stable coal wall, according to a thorough evaluation of a multi-factor fuzzy mathematical model. The working face's mining pressure is continuously and dynamically monitored, and the stress is released in a timely manner to prevent the occurrence of dynamic disasters.

The Roof Safety under Large Mining Height Working Face: A Numerical and Theoretical Study

Model of Overlying Strata Structure in Large Mining Height Excavating Condition and Calculation of Support Working Resistance

Abutment Pressure Distribution Law and Support Analysis of Super Large Mining Height Face

Study on roof breaking mechanism and support stability of steeply dipping seam and large mining height

Research on the Mechanism and Control Technology of Coal Wall Sloughing in the Ultra-Large Mining Height Working Face

Study on Surrounding Rock Control and Support Stability of Ultra-Large Height Mining Face

A study on the mechanism and control technology of strong mine pressure in parallel coal pillar and hard roof mining

Characteristics of Strata Behavior and Differentiated Control of Fully Mechanized Mining Working Face with Abnormal Roof

Disaster Control of Roof Falling in Deep Coal Mine Roadway Subjected to High Abutment Pressure

Double-factor control method for calculating hydraulic support working resistance for longwall mining with large mining height

Study on Roof Instability Effect and Bearing Characteristics of Hydraulic Support in Longwall Top Coal Caving

Study on the Relationship between Hydraulic Support on the Working Face with Large Mining Height and Surrounding Rock

Study on the Spatiotemporal Dynamic Evolution Law of a Deep Thick Hard Roof and Coal Seam

Study on Pressure Characteristics and Roof Subsidence Law of Narrow Strip Filling Mining

Principle and practice of hydraulic softening top-cutting and pressure relief technology in weakly cemented strata

Research on the Movement Law of Roof Structure in Large-Inclined Coal Seam Working Face: A Case Study in Liu.Pan.Shui. Mining Area

Study on the Migration Law of Overlying Strata on the Working Surface of Large Mining Height in Y.C.W Coal Mine

Roof movement and instability fracture characteristics in shallow-buried thin coal seam conventional mining faces

Study on the controller factors associated with roof falling and ribs spalling in deep mine with great mining height and compound roof

Analysis and Application of Hydraulic Fracturing to Control Hard and Stable Roof in Initial Mining Stage