Abstract:The aim of this study was to develop new materials with adsorbent properties that can be used for the adsorption recovery of Au(III) from aqueous solutions. To achieve this result, it is necessary to obtain inexpensive adsorbent materials in a granular form. Concomitantly, these materials must have a high adsorption capacity and selectivity. Other desired properties of these materials include a higher physical resistance, insolubility in water, and materials that can be regenerated or reused. Among the methods applied for the separation, purification, and preconcentration of platinum-group metal ions, adsorption is recognised as one of the most promising methods because of its simplicity, high efficiency, and wide availability. The studies were carried out using three supports: cellulose (CE), chitosan (Chi), and diatomea earth (Diat). These supports were functionalised by impregnation with extractants, using the ultrasound method. The extractants are environmentally friendly and relatively cheap amino acids, which contain in their structure pendant groups with nitrogen and sulphur heteroatoms (aspartic acid—Asp, l-glutamic acid—Glu, valine—Val, DL-cysteine—Cys, or serine—Ser). After preliminary testing from 75 synthesised materials, CE-Cys was chosen for the further recovery of Au(III) ions from aqueous solutions. To highlight the morphology and the functionalisation of the material, we physicochemically characterised the obtained material. Therefore, the analysis of the specific surface and porosity showed that the CE-Cys material has a specific surface of 4.6 m2/g, with a porosity of about 3 nm. The FT-IR analysis showed the presence, at a wavelength of 3340 cm−1, of the specific NH bond vibration for cysteine. At the same time, pHpZc was determined to be 2.8. The kinetic, thermodynamic, and equilibrium studies showed that the pseudo-second-order kinetic model best describes the adsorption process of Au(III) ions on the CE-Cys material. A maximum adsorption capacity of 12.18 mg per gram of the adsorbent material was achieved. It was established that the CE-Cys material can be reused five times with a good recovery degree.

Facile preparation of L-cysteine–modified cellulose microspheres as a low-cost adsorbent for selective and efficient adsorption of Au(III) from the aqueous solution

Ultrahigh and selective adsorption of Au(III) by rich sulfur and nitrogen-bearing cellulose microspheres and their applications in gold recovery from gold slag leaching solution

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Performance and mechanism of selective adsorption of silver to L-cysteine functionalized cellulose microsphere

Recovery of Au(III) by Radiation Synthesized Aminomethyl Pyridine Functionalized Adsorbents Based on Cellulose

Efficient and Selective Adsorption of Pd(II) by Amino Acid-Functionalized Cellulose Microspheres and Their Applications in Palladium Recovery from PCBs Leaching Solution

Selective and Effective Gold Recovery from Printed Circuit Boards and Gold Slag Using Amino-Acid-Functionalized Cellulose Microspheres

Synthesis of Some Eco-Friendly Materials for Gold Recovery

Highly efficient and selective recovery of Au(III) by cellulose microspheres bearing nucleobase and their applications in gold slag treatment

Superior sorption capacity and one-step reduction of Au(III) by a novel chitosan-based electrospun fiber mat: A cheap and simple technique

Preparation of Cysteamine-Modified Cellulose Nanocrystal Adsorbent for Removal of Mercury Ions from Aqueous Solutions

Surface modification of cellulose microsphere with imidazolium-based ionic liquid as adsorbent: effect of anion variation on adsorption ability towards Au(III)

Selective recovery of gold(III) using cotton cellulose treated with concentrated sulfuric acid

Synthesis of a novel fibrous material for effective Au(III) recovery with superior selectivity and one-step reduction

Two all-biomass cellulose/amino acid spherical nanoadsorbents based on a tri-aldehyde spherical nanocellulose II amino acid premodification platform for the efficient removal of Cr(VI) and Cu(II)

Chitosan functionalized with N,N-(2-aminoethyl)pyridinedicarboxamide for selective adsorption of gold ions from wastewater

Radiation Synthesis And Heavy Metal Ions Removal Of Cellulose Microsphere Based Adsorbent

Adsorption Behavior and Mechanism of Au(III) on Caffeic Acid Functionalized Viscose Staple Fibers

Optimum synthesis of an amino functionalized microcrystalline cellulose from corn stalk for removal of aqueous Cu2+

Aliquat-336 impregnated chitosan microspheres for Au(I) extraction from thiosulfate solution: Preparation, adsorption mechanism, and application

Properties and mechanism for selective adsorption of Au(iii) on an ionic liquid adsorbent by grafting<i>N</i>-methyl imidazole onto chloromethylated polystyrene beads