Abstract:Recovering gold from wastewater has both economic and environmental benefits. However, how to effectively recover it is challenging. In this work, a novel Fe-based metal-organic framework (MOF) was synthesized and decorated with 2,5-thiophenedicarboxylic acid to have a well-developed porous architecture to effectively recover Au(III) from water. The maximum Au(III) sorption capacity by the finally-synthesized porous material MIL-101(Fe)-TDCA reached 2350 mg/g at pH = 6.00 ± 0.15, which is one of the highest among all literature-reported relevant materials including MOFs, and high sorption strength can be maintained within a wide pH range from 2.0 to 10.0. Besides, Au(III) sorption efficiency at low concentrations (i.e., 3.5 × 10−4 mg/mL) reached over 99 %. Mechanically, outstanding Au(III) sorption by MIL-101(Fe)-TDCA resulted from the O/N/S-containing moieties on its surface, large surface area and porosity. The N- and S-containing functionalities (CS, CONH) served as electron donors to chelate Au(III). The O-containing (FeOFe, COFe, COOH, and coordinated H2O) and N-containing (CONH) moieties on MIL-101(Fe)-TDCA interacted with OH groups on the hydrolyzed species of Au(III) (AuCl3(OH)−, AuCl2(OH)2−, and AuCl(OH)3−) by hydrogen bond, which further increased Au(III) sorption. Furthermore, about 45.71 % of Au(III) was reduced to gold nanoparticles by CS groups on the decorated 2,5-dithiophene dicarboxylic acid during sorption on MIL-101(Fe)-TDCA. Over 98.35 % of Au(III) was selectively sorbed on MIL-101(Fe)-TDCA at pH 4.0, much higher than that of the coexisting heavy metal ions including Cu(II), Zn(II), Pb(II), and Ni(II) (<5 %), despite their same concentration at 0.01 mg/mL. Although sorption selectivity of a noble metal Pt(IV) by MIL-101(Fe)-TDCA is relatively poor (68.23 %), it could be acceptable. Moreover, reusability of MIL-101(Fe)-TDCA is also excellent, since above 90.5 % Au(III) still can be sorbed after two sorption-desorption cycles. Overall, excellent sorption performance and the roughly-calculated gold recycling benefits (26.30 %) highlight that MIL-101(Fe)-TDCA is a promising porous material for gold recovery from the aqueous phase.

Selective recovery of gold ions in aqueous solutions by a novel trithiocyanuric-Zr based MOFs adsorbent

Selective Removal Mechanism of the Novel Zr-based Metal Organic Framework Adsorbents for Gold Ions from Aqueous Solutions

Twofold Interpenetrated Cationic Metal-Organic Framework with Hydrophobic Channels for Effectively Trapping Toxic Oxo-Anions

Dual thiols-decorated metal–organic framework for efficient separation and recovery of gold

Regulating the Interface Polarity Distribution of Zr-Based MOFs by Amino Acid-Like Ligand Functionalization Enables Efficient Recovery of Gold.

Efficient recovery of gold using Macroporous Metal-Organic framework prepared by the 'MOF in MOF' method

Efficient and Selective Recovery of Au(III) from Aqueous Solution by Functionalized UiO-67 Materials: Cooperative Effects of Diamino-Functionalization and Charge Modulation

External optimization of Zr-MOF with mercaptosuccinic acid for efficient recovery of gold from solution: Adsorption performance and DFT calculation

MIL-161 Metal–Organic Framework for Efficient Au(III) Recovery from Secondary Resources: Performance, Mechanism, and DFT Calculations

Exceptionally amino-quantitated 3D MOF@CNT-sponge hybrid for efficient and selective recovery of Au(III) and Pd(II)

Zr 4+ -mercaptosuccinate MOF for the uptake and recovery of gold nanoparticles and gold ions under batch and continuous flow conditions

An O/N/S-rich porous Fe-based metal-organic framework (MOF) for gold recovery from the aqueous phase with excellent performance

Selective and highly efficient recovery of Au(III) by poly(ethylene sulfide)-functionalized UiO-66-NH2: Characterization and mechanisms

Highly selective and effective gold recovery from electronic wastewater by synergistic effect between covalent organic framework (COF) and MoS 2 : Performance and mechanisms

Development of mercaptosuccinic anchored MOF through one-step preparation to enhance adsorption capacity and selectivity for Hg(II) and Pb(II)

Engineering Hydroxyls on a Metal-Organic Framework As Adsorbers and High-Activity Dehydrochlorination Sites for Selective Gold Recovery

Removal of Transition Metal Ions from Aqueous Solutions by Adsorption Using a Novel Hybrid Material Silica Gel Chemically Modified by Triethylenetetraminomethylenephosphonic Acid.

The design of high-efficient MOFs for selective Ag(I) capture: DFT calculations and practical applications

Efficiently Selective Extraction of Iron (III) in an Aluminum‐based Metal‐organic Framework with Native N Adsorption Sites

Enhanced arsenite removal from water using zirconium-ferrocene MOFs coupled with peroxymonosulfate:oxidation and multi-sites adsorption mechanism

Fe3O4 Nanoparticles Functionalized with Poly(ethylene Glycol) for the Selective Separation and Enrichment of Au(iii)