Abstract:A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low-power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant energy savings. The proposed flip-flops operate with a single-phase sinusoidal clock, which can be generated with high efficiency. In the TSMC 0.25-$\mu$m CMOS technology, we implemented 1024 proposed energy recovery clocked flip-flops through an H-tree clock network driven by a resonant clock-generator to generate a sinusoidal clock. Simulation results show a power reduction of 90% on the clock-tree and total power savings of up to 83% as compared to the same implementation using the conventional square-wave clocking scheme and flip-flops. Using a sinusoidal clock signal for energy recovery prevents application of existing clock gating solutions. In this paper, we also propose clock gating solutions for energy recovery clocking. Applying our clock gating to the energy recovery clocked flip-flops reduces their power by more than 1000× in the idle mode with negligible power and delay overhead in the active mode. Finally, a test chip containing two pipelined multipliers one designed with conventional square wave clocked flip-flops and the other one with the proposed energy recovery clocked flip-flops is fabricated and measured. Based on measurement results, the energy recovery clocking scheme and flip-flops show a power reduction of 71% on the clock-tree and 39% on flip-flops, resulting in an overall power savings of 25% for the multiplier chip.

Design of low power 16-bit counter with Programmable Combinational Logic and Integrated Clock Gating using 16-nm technology

GHz Programmable Counter with Low Power Consumption

A 2ghz Programmable Counter with New Re-Loadable D Flip-Flop

Research on low power technology based on Multi Bit Flip Flop

LECTOR Based Clock Gating for Low Power Multi-Stage Flip Flop Applications

New Method for Low Power Sequential Circuit Design Based on Clock Gating

Data-Dependent Clock Gating approach for Low Power Sequential System

Dynamic Current Mode Logic Based Flip-Flop Design for Robust and Low-Power Security Integrated Circuits

Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Low-power level converting flip-flop with a conditional clock technique in dual supply systems.

Design and Analysis of Power Efficient TG Based Dual Edge Triggered Flip-Flops with Stacking Technique

Design and Power Dissipation Consideration of PFAL CMOS V/S Conventional CMOS Based 2:1 Multiplexer and Full Adder

Silicon on insulator null convention logic based asynchronous circuit design for high performance low power digital systems

Power-efficient Dual-Edge Implicit Pulse-Triggered Flip-Flop with an Embedded Clock-Gating Scheme.

Design and Implementation of Bit Transition Counter

Low Clock Swing D Flip-Flops Design by Using Output Control and MTCMOS

Implementation of Energy Efficient gates using Adiabatic Logic for Low Power Applications

Power Gating Structure for Reversible Programmable Logic Array

Design of A Low-Power Pulse-Triggered Flip-Flop with Conditional Clock Technique

Design and Analysis of Low Power and High-Speed Dynamic Comparator with Transconductance Enhanced in Latching Stage for ADC Application