Abstract:For greater productivity, oil and gas are increasingly being transported at higher pressures through steel pipelines, which has necessitated the development of thick-gauge high-strength–high-toughness line pipe steels. In this work, the microstructural evolution of a 22-mm-thick Nb and Ti microalloyed API Grade X70 line pipe steel subjected to thermomechanical processing is investigated. The microstructure of the steel sample was analyzed using advanced characterization techniques to glean insight into microstructure and texture. The surface of the plate consisted of a relatively higher fraction of polygonal ferrite, whereas the plate interior possessed a higher fraction of non-polygonal ferritic structure. The grain size was found to increase from the surface to the center of the plate. The presence of a higher fraction of secondary phases, such as degenerated pearlite (DP) and martensite austenite (MA) constituents, was observed toward the core of the plate. The major texture components ({001} , {113} , and {332} ) were found to be present through the thickness. However, their intensity increased toward the core of the plate. Higher intensity of {113} toward the core of the plate may cause a higher degree of anisotropy of mechanical properties than the surface of the plate. The detrimental impact of {001} texture on fracture may get counterbalanced by the beneficial impact of {113} texture on toughness. A high fraction of composite coarse precipitates ((Nb,Ti)CN type) in the outer part of the plate may contribute to an increase in grain refinement in the final microstructure during the processing of the plate. In contrast, a high fraction of fine precipitates (<20 nm) observed in the ferrite matrix at the core may contribute to a higher ductile-brittle transition temperature. An in-depth understanding of microstructure will allow its correlation with the mechanical properties needed for thick gauge pipelines with higher transmission rates.

Effect of Heat Treatment in Pipe Processing Stage on Corrosion Resistance of Micro-Alloyed Steel Hot-Rolled Products

Corrosion Failures of High Temperature Heat Pipes

Effect of heat treatment on the microstructure and mechanical properties of a low-carbon X80 pipeline steel

Improvements in steel production technology for main pipelines

To Investigate the Effect of Heat Treatment on API X70 Pipeline Steel

Corrosion behavior study on heat treated API X70 pipeline steel exposed in different aggressive environments

Effect of Microstructure and Heat Treatment on Resistance of Steels to Carbon Dioxide Corrosion

EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND PITTING CORROSION RESISTANCE OF 22cr DUPLEX STAINESS STEEL

Effect of Heat Treatment on Microstructure and Corrosion Properties of Double-Wire GTA Additive Manufactured 308L Stainless Steel

Investigating the effect of post weld heat treatment on corrosion properties of explosive bonded interface of AA5083/AA1050/SS 321 tubes

Effect of Copper Content and Heat Treatment Schedules on Mechanical Properties, Cold Resistance, and Microstructural Constituent Morphology in Precipitation-Hardened Steel

Study on metal corrosion behavior of heat-affected zone of oil pipeline

The Effect of Heat Treatment Parameters on the Mechanical and Microstructural Properties of an ASTM A860 WPHY 65 Pipe Fitting: An Experimental Investigation

Investigation of Pipe Steels Resistance against Corrosion Caused by Carbon Dioxide in Oil Media of Different Composition. Part 2

Heat treatment effect on corrosion resistance and mechanical properties of EP718 precipitation-hardened nickel-based alloy

Heat Treatment of Corrosion-Resistant Austenitic-Ferritic Steel For Immersion Pumps

Effect of Heat Treatment on the Microstructure and Corrosion Resistance of Stainless/Carbon Steel Bimetal Plate

Studying the Microstructural Evolution in a Hot-Rolled Thick Gauge Microalloyed Line Pipe Steel

Effect of heat treatment on structure and mechanical properties of dispersion-hardened iron-based alloys

Effect of post-processing heat treatment on hydrogen embrittlement susceptibility of API 5L X70 pipeline steel

Effect of Presence of Chromium in the Composition of Low-Alloy Pipe Steels on the Corrosion Resistance in Oilfield Environments