Abstract:This study investigates a novel composite material that combines siliceous rock dust and Urtica dioica fiber in vinyl ester matrix for sustainable material applications. This research explores the importance of waste rock dust as potential replacement for commercially used ceramics in composite development. The composites were developed via typical hand layup process and characterized for composite's mechanical strength, fatigue resistance, and hydrophobic properties as per ASTM standards. Mechanically, the composite containing fiber and rock dust of 3 vol% (VNS2) displays exceptional properties, with a tensile strength of 148 MPa, flexural strength of 199 MPa, compression strength of 174 MPa, and a notable impact energy of 5.4 J. However, the composite containing fiber and rock dust of 5 vol% (VNS3) displays, on the other hand, and stands out for its impressive hardness, registering at 82. In fatigue testing, the composite containing fiber and rock dust of 3 vol% (VNS2) exhibits superior performance, enduring 22,199 cycles at 25% UTS, 20,838 cycles at 50% UTS, and 19,935 cycles at 75% UTS, underscoring its exceptional durability. Regarding hydrophobicity, the composite initially displays a contact angle of 98°, indicating water repellency. However, the introduction of Urtica dioica fibers and siliceous rock dust particles marginally increased hydrophilicity, with the composite containing fiber and rock dust of 5 vol% (VNS3) showing a lower contact angle of 82°. Moreover the wear results show that the composite VNS3 gives lowest COF of 0.18 and sp. wear rate of 0.008 mm 3 /Nm. Similarly the thermogravimetry results revealed that the composite VNS3 gives lowest mass loss of 2.12% with lower DTG. Same way, the addition of rock dust particle into the resin improved the flame retardant properties of composite with V-0 flame rating. These composites promise various applications, including aerospace, construction, marine, and automotive industries where high load bearing, fire proofing, and fire stopping phenomenon are required.

Mechanical strength of quartz reinforced polyvinyl acetate/leaves-waste composite

Effect of quartz sand on compressive strength of the solid waste composite

HIGH STRENGTH MANGO LEAF WASTE/POLYURETHANE COMPOSITE REINFORCEMENT USING QUARTZ MATERIAL

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

Sustainable Cement Mortar with Recycled Plastics Enabled by the Matrix-Aggregate Compatibility Improvement

Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite

Sustainable Engineering Polymer Composites Fabricated Using Delignified Bamboo Fiber as Reinforcement and Walnut Shell Powder as Filler

Compression molding of polypropylene‐ and polyethylene‐based composite materials using siliceous waste concrete powder

Preparation of Waste PP/Fly Ash/Waste Stone Powder Composites and Evaluation of Their Mechanical Properties

Synergy of RHA and silica sand on physico-mechanical and tribological properties of waste plastic–reinforced thermoplastic composites as floor tiles

The Physical-Mechanical Properties in Aggressive Media of Epoxy Composite Reinforced with Waste Glass Materials

Analysis on the impact of recycled ceramic waste, fiber format, and manufacturing techniques on polymer composite properties

Analysis of the physical–mechanical behavior of the polymer composite reinforced with silicon flotation residue

Preparation and Characterisation of Sustainable Wood Plastic Composites Extracted from Municipal Solid Waste

Preparation and Characterisation of Composites from Industrial Waste: Wood Flour and Expanded Ethylene Vinyl Acetate

Investigation of polymer injection molding using calcareous waste concrete powder and polyethylene

Effect of recycled polyester fiber reinforcement on the mechanical behavior and microstructure of red mud-improved volcanic ash

Effect of adding Urtica dioica–chopped fiber on load bearing, wear, fatigue, thermal stability, flammability, and water absorption behavior of rock dust dispersed vinyl ester composite

Effects of Maleic Anhydride-Grafted Polyethylene on the Properties of Artificial Marble Waste Powder/Linear Low-Density Polyethylene Composites with Ultra-High Filling Content

Formulation optimization and performance enhancement of polyvinyl chloride-silica micropowder composites with a promising flooring application

Effect of natural hybrid fillers reinforced vinyl ester composites on mechanical and physical properties