Abstract:The R&D Building of Zhanjiang Bay Laboratory is a high-rise structure with multiple irregular items exceeding the specification limit, employing a steel frame-shear wall structural system. The outer frame consists of square steel tube concrete columns and solid-web steel beams, while the core shear wall uses a double steel plate concrete composite shear wall. This paper employs the architectural structural calculation software YJK-EP to perform a dynamic elastic-plastic time-history analysis under rare earthquake action. The shear and bending resistance of the shear wall at the maximum shear force and bending moment are checked to meet the requirements of the "Technical Specifications for Concrete Structures of High-rise Buildings". The maximum inter-story displacement angle meets the requirements of the "Code for Seismic Design of Buildings". The double steel plate concrete composite shear wall Wall-1, connected to a large-span and heavy-load transfer truss, was verified under significant seismic action using the ABAQUS software. The results indicate that Wall-1 can meet the design target requirements under major earthquake conditions. Finally, a dynamic nonlinear analysis method was employed using MIDAS-GEN software to study the structure's anti-progressive collapse performance. The results show that under seven different scenarios, the maximum rotational angle of the remaining structural horizontal members is 2.02°, far less than the limit set by GSA, indicating that a progressive collapse did not occur. In the scenario where the corner column is removed, both the maximum shear and bending moment values for Wall-1 are far below its shear and bending resistance capacities, satisfying the load-bearing requirements. The removal of the corner column has a significant impact on the displacement of the columns on the same level nearby, with the peak displacement change rate reaching 702.65%.

Safety Evaluation of Dry-fasten Stone Curtain Wall Structure of Existing Building

Safety problem and appraisal method for building curtain wall

Study of accelerated ageing test methods of sealant applied in curtain wall

The Dry Fasten Stone Curtain Wall Construction Practice of a Engineering in Guilin

FIELD INSPECTION TECHNIQUE OF STRUCTURAL SILICONE ADHESIVE ON EXISTING GLASS CURTAIN WALL

Comprehensive Appraisal of the Safety of Hidden Frame Glass Curtain Wall Based on Fuzzy Theory

Safety Evaluation of Existed Glass Curtain Wall

Seismic Behavior of a Stone Curtain Wall System With Undercut Bolt Anchorage Under Various Loading Protocols

State-of-the-art Development on ‘code for Design of Masonry Structures’

Appraisal for Wind-Resistant-Strength of a New Type Stone Curtain Wall with Back Channels

Assessing the hygrothermal performance of typical lightweight steel-framed wall assemblies in hot-humid climate regions by monitoring and numerical analysis

The Curtain Wall Technology in Green Building

Monitoring and Analysis of Building Curtain Wall Deformation Based on Optical Fiber Sensing Technology

In-Plane Strengthening Effect of Prefabricated Concrete Walls on Masonry Structures: Shaking Table Test

Evaluation on Fire Prevention Performance of Glass Wall

Study on the Point-Supported Glass Curtain Wall

Study on Deformation Behavior of Lozenge Curtain Wall Unit in CCTV New Building

Research advances of composite shear walls with double steel plates and filled concrete

EXPERIMENTAL ANALYSIS OF STRUCTURAL PERFORMANCE OF SUPER HIGH BOTTOM-SUPPORTED GLASS FIN CURTAIN WALL SYSTEM

Analysis and Application of Double Steel Plate Concrete Composite Shear Wall in the R&D Building of Zhanjiang Bay Laboratory

Numerical Analysis for Seismic Response of a Super-Tall Curtain Wall Structure Considering Glass Stiffness