Abstract:This study presents an adaptive algorithm for distance relays. In this algorithm, the network connected to the transmission line terminals are modelled using an equivalent circuit, and the impedances of this equivalent circuit are estimated. By employing this algorithm, relay errors (over/under reach) caused by changes in network structure, the presence of fault resistance, and injected current from the remote end of the transmission line are eliminated. As a result, the relay accurately determines fault location and fault resistance, enhancing the performance of its Zone1 and Zone2 functions. Faults in power systems occur for various reasons, such as aging or natural disasters. Detecting, locating, and promptly clearing these faults is crucial for maintaining the safety and reliability of transmission lines (TLs). Distance relays (DRs), which protect TLs, detect faults, estimate their location, and send the required commands. However, these relays may experience mis‐detection due to manipulated impedance arising from both internal and external factors. These factors include measurement device errors, network topology changes, the presence of fault resistance (FR), and injected currents from remote line terminals. To address this challenge, an innovative adaptive protection scheme that considers FR, changes in network topology, and injected current from the opposite end of the line is proposed. By estimating the equivalent circuit impedances (ECIs) of the network connected to the terminal of the TL, this protection scheme utilizes impedance estimation techniques at the line terminals and offline network information. Simulation studies (tested on the IEEE 39‐bus standard network) show that the proposed scheme accurately estimates fault location (FL) and FR with high precision. The simulation results demonstrate its effectiveness in improving the performance of conventional distance protection relays in both the first and second protection zones (Zone1 and Zone2 ).

Adaptive Third-Zone Distance Protection Scheme for Power System Critical Conditions

Single-phase-to-ground Fault Detection with Distributed Parameters Analysis in Non-Direct Grounded Systems

An adaptative differential zone fault locating scheme for distribution system with DGS

Wide-area measurement system-based supervision of protection schemes with minimum number of phasor measurement units

An adaptive distance protection scheme considering fault resistance, injected current, and structural changes in the power system

Effective protection scheme for transmission lines connected to large scale photovoltaic power plants

A Novel Fault Detection and Location Approach for DC Zonal Shipboard Microgrid Based on High-Frequency Impedance Estimation With IEC 61850 Communication Protocol

An adaptive and reliable protection scheme for critical fault detection in IEC microgrid considering dissimilar AC faults and weather-based random scenarios

A novel graph search and machine learning method to detect and locate high impedance fault zone in distribution system

A Hybrid Intelligent System for Protection of Transmission Lines Connected to PV Farms based on Linear Trends

A Novel High Impedance Fault Detection Strategy for Microgrid Based on Differential Energy Signal of Current Signatures and Entropy Estimation

Study On Distance Protection Based On Wide Area Information

An Earth Fault Diagnosis Method Based On Online Dynamically Calculated Thresholds for Resonant Ground Systems

Detection and Classification of Faults in MTDC Networks

A fault-component based adaptive distance protection scheme

An adaptive protection scheme for multiple single-phase grounding faults in radial distribution networks with inverter-interfaced distributed generators

Evaluating synchrophasor-enabled angle-based differential protection in distribution networks

Universal Adaptive Differential Wavelet Energy-Based Protection Scheme for an AC Microgrid

Optimize single line to ground fault detection in distribution grid power system using artificial bee colony

Detection of Single-Phase to Ground Faults in Low-Resistance Grounded MV Systems