Abstract:A variety of energetic material (EM) devices could be designed more efficiently with a more rapid protocol of modeling and testing if computational tools are more predictive. Drop weight impact tester (DWIT) is widely used to experimentally study energetic material response to impact. Drop weight impact on a thin layer of RDX powder is studied here and computationally modeled to compute the likelihood of EM powder ignition from low‐speed impact. The overall objective is to develop a thermomechanical‐based FEM methodology that can qualitatively predict ignition‐likelihood to study iginition mechanics in EM powders and understand how anvil properties and striker impact conditions influence it. The mechanical confinement conditions offered by an anvil and striker type, influence energy transmission and heat localization within the energetic powder. Efficiently modeling both the bulk behavior and the mesoscopic behavior, such as, localized shear and particle‐to‐particle frictional heating, is necessary to design insensitive EM‐devices. A 3D finite element modeling (FEM) approach is described that more accurately models the impact conditions than previously developed 2D models. The results are compared with the experimental results and the 2D simulations. A continuum‐based explicit FEM can only simulate the bulk‐behavior of the powder. To accurately predict hot‐spot ignition mechanisms, meso‐scale multi‐particle models of the EM is needed. For computational efficiency, hybrid models that combines continuum and multi‐particle FEM (MPFEM) were utilized. The computed temperature profiles are compared for two anvil types and demonstrates that an assessment of ignition likelihood is viable with the hybrid methodologies proposed.

Optimal Falling Track Design for Twice detonating Fuze of Double event Fuel air Explosive with High Speed

Optimization of Ejection Characteristics for Twice-Detonating Device in Double-Event Fuel-Air Explosive with High Drop Velocity

Preliminary design and dynamical analysis of a new deployable air target

Theoretical Analysis and Numerical Simulation of the Motion of RDX Deflagration-Driven Flyer Plate Based on Laser-Initiated Micro-Pyrotechnic Devices

Systematic Analysis on Gas‐Liquid‐Solid Three‐Phase Flow and Initiation Structure for Fuel‐Air Explosive Weapon Reliability

Orthogonal Optimization Design for Combined MEFP Warhead

Design and Performance of a Micro-Scale Detonation Train with a Built-in Pyrotechnic MEMS-based Safety and Arming Device

Hybrid Continuum and Multi‐Particle Simulation of RDX Powder Subjected to Drop Impact

Innovation of control technology for smart fuzes: precise detonation and efficient damage via a ternary cascade controller

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Numerical simulation of multi‐layer flyer impact initiation of a certain PBX explosive

Modeling of the exploding foil initiator and related circuitry for the variable mode of operation

Numerical Approach in Predicting the Formation Process of Tandem Explosively Formed Projectile

Dynamics Analysis of Separation Mechanism for Rotating Projectiles at the End of Trajectory

An Alternating Finite Difference Material Point Method Fornumerical Simulation of High Explosive Explosion Problems

Test and Improvement of a Fuze MEMS Setback Arming Device Based on the EDM Process

Scaled Experiment of the Detonation Control System for the High-Speed Penetration on Concrete

An Approach to Incorporate the Detonation Shock Dynamics into the Calculation of Explosive Acceleration of Metals

Forming Control of Rod-Shaped Tantalum-Tungsten Alloy Explosively Formed Projectile

Low speed impact simulation of explosive charge based on three-dimensional numerical manifold method

The Calculation and Optimal Design on the Lethal Power of a Large-caliber High Explosive Projectile