Abstract:A numerical model describing the ballistic behavior of a commercially used initiator is presented in this article. This model was built on the principle of conservation of mass and energy in the multi-phase framework incorporated with multi-loaded conditions. After obtaining the information about the grain size distribution in each composite, a fixing factor was proposed based on the surface area ratio of the composites. Thus, the solid propellant burning process based on distributed grain size was described, and the burn rate parameters of the applied pyrotechnic compositions were re-evaluated for different preconditioned temperature levels according to Vieille’s law. The influence of bridge wire and initiator metal cap was further modeled concerning their characteristic properties according to the observed measurements. The validation of the entire initiator model in the closed bomb test showed quantitative agreement with the measured pressure evolution, while the parameter study for evaluating the ballistic sensitivity of each component delivered some insights into the product development process. Furthermore, the configuration of a cold gas inflator was utilized to evaluate the initiator impact for a realistic application, where the shock wave intensity during deployment serves the main function in the inflator design. Incorporated with CFD simulations to capture the shock wave propagation, 0D-3D coupling strategy for initiator ballistics to inflator configuration was realized. Besides, the simulation results reflected the physical conditions in a proper manner. In particular, the parameter study led to a better understanding of interactions between inflator components, which were barely possible to be quantified through the measurements. The proposed initiator model could also be used in combination with other mechanical principles as a component of pyrotechnic devices such as pin-puller, electric line cutters, or airbag inflators. The detailed information gained in describing the physical properties enabled us to assess the existing design quantitatively and to have better control of the product quality.

Numerical simulation of multi‐layer flyer impact initiation of a certain PBX explosive

A Systematic Method to Determine and Test the Ignition and Growth Reactive Flow Model Parameters of a Newly Designed Polymer‐Bonded Explosive

Dynamic damage and non‐shock ignition behavior of polymer bonded explosive under lower velocity impact

A Constitutive Model for the Shock Ignition of Polymer Bonded Explosives

Multiscale Modeling for Dynamic Compressive Behavior of Polymer Bonded Explosives

Hybrid Continuum and Multi‐Particle Simulation of RDX Powder Subjected to Drop Impact

Coupled Mechanical−Thermal Model for Numerical Simulations of Polymer−Bonded Explosives under Low−Velocity Impacts

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Experimental analysis and multi-scale simulation of the fracture behavior of polymer-bonded explosives based on the dynamic notched semi-circular bend method

Numerical Analysis of the Damage and Failure Behavior of Polymer-Bonded Explosives Using Discrete Element Method

Numerical Study of PBX 9501 Explosive Combustion Process in Confined Space

Characterization, Modeling and Simulation of the Impact Damage for Polymer Bonded Explosives

Numerical Investigation of Pyrotechnical Initiators and Their Impact in Airbag Inflator Applications: Ballistic Modeling and Functional Analysis

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Dynamic Mechanical Damage and Non-Shock Initiation of a New Polymer Bonded Explosive During Penetration

Numerical Simulation of the Blast Wave of a Multilayer Composite Charge

Numerical Simulation on Initiating Value of Low-Density Jet Impacting Explosive with Shell

Meso-Simulation and Experimental Research on the Mechanical Behavior of an Energetic Explosive

A new Ignition-Growth reaction rate model for shock initiation

Theoretical Analysis and Numerical Simulation of the Motion of RDX Deflagration-Driven Flyer Plate Based on Laser-Initiated Micro-Pyrotechnic Devices

Simulation of high explosive explosion using adaptive material point method