Abstract:The mechanical properties of high-toughness engineering cementitious composites (ECC) were tested, and a damage constitutive model of the materials was constructed. A new aseismic composite structure was then built on the basis of this model by combining aseismic joints, damping layers, traditional reinforced concrete linings, and ECC linings. A series of 3D dynamic-response numerical models considering the composite structure-surrounding rock-fault interaction were established to explore the seismic response characteristics and aseismic performance of the composite structures. The adaptability of the structures to the seismic intensity and direction was also discussed. Results showed that the ECC material displays excellent tensile and compressive toughness, with respective peak tensile and compressive strains of approximately 300- and 3-fold greater than those of ordinary concrete at the same strength grade. The seismic response law of the new composite lining structure was similar to that of the conventional composite structure. The lining in the fault zone and adjacent area showed obvious acceleration amplification responses, and the stress and displacement responses were fairly large. The lining in the fault zone was the weak part of the composite structures. Compared with the conventional aseismic composite structure, the new composite lining structure effectively reduced the acceleration amplification and displacement responses in the fault area. The damage degree of the new composite structure was notably reduced and the damage area was smaller compared with those of the conventional composite structure; these findings demonstrate that the former shows better aseismic effects than the latter. The intensity and direction of seismic waves influenced the damage of the composite structures to some extent, and the applicability of the new composite structure to lateral seismic waves is significantly better than that to axial waves. More importantly, under the action of different seismic intensities and directions, the damage degree and distribution area of the new composite structure were significantly smaller than those of the conventional composite lining structure.

Application of fiber-reinforced concrete lining for fault-crossing tunnels in meizoseismal area to improving seismic performance

Study on the Model Test of the Antibreaking Effect of Fiber Reinforced Concrete Lining in Tunnel

Aseismic Performance Analysis of Composite Lining Embedded in Saturated Poroelastic Half Space

Experimental Study on Load Bearing Characteristics of Steel Fiber Reinforced Concrete Lining in the Soft Surrounding Rock Tunnel

Dynamic behavior of fault tunnel lining under seismic loading conditions

Experimental study on the damage performance and forced response of concrete lining in fault-crossing tunnel

Numerical Analysis of the Seismic Response of Tunnel Composite Lining Structures across an Active Fault

Seismic Response and Security Assessment of Cross-Fault Hydraulic-Tunnel Lining Structures

Experiments and Numerical Simulation of the Reinforcement Effect of Channel-Steel-reinforced Shield Tunnel Segments under Unloading Conditions

A Review on Seismic Response and Aseismic Measures of Fault-crossing Tunnels

Mechanical Response Study of a Cross-Fault Water Conveyance Tunnel under the Combined Action of Faulting Dislocation and Seismic Loading

Cracking Pattern and Bearing Capacity of Steel Fiber-Reinforced Concrete Single-Layer Tunnel Lining

Study on Design of Tunnel Lining Reinforced by Combination of PCM Shotcrete and FRP Grid Technique

Seismic energy response and damage evolution of tunnel lining structures

Damage prediction for tunnel lining considering mechanical behaviour of fibre reinforced concrete with action of train loading

Numerical Simulation of Surrounding Rock Deformation and Grouting Reinforcement of Cross-Fault Tunnel under Different Excavation Methods

Numerical Modeling of Seismic Responses and Seismic Measures of Tunnel Crossing a Fault Zone: A Case Study

Local Site Effect of Fault Site and Its Impact on Seismic Response of Fault-Crossing Tunnel

Thermal Performance and Parameter Study of Steel Fiber-Reinforced Concrete Segment Lining in Energy Subway Tunnels

Diagnosis and Monitoring of Tunnel Lining Defects by Using Comprehensive Geophysical Prospecting and Fiber Bragg Grating Strain Sensor

Study on Crack Development of Concrete Lining with Insufficient Lining Thickness Based on CZM Method