Abstract:For the purpose of investigating the damage mechanism and failure characteristics of tunnel lining under the strike-slip fault movements, a three-dimensional elastoplastic finite element model was established in the present study including a railway tunnel across an active strike-slip fault. With the assistance of this numerical model, the tensile and compressive damage, plastic strain development process, and shear failure of the secondary lining at different fault plane positions were analyzed, and further, the damage laws of the secondary lining at different fault displacement and tunnel-fault intersection angles were summarized. The simulation results showed that when the maximum imposed fault displacement is 30 cm, the most unfavorable fault plane appears at the junction between the moving block and the fracture zone, and serious tensile cracks and shear failures occur on each fault rupture plane. Besides, the maximum plastic strain and compressive damage are distributed in the vault and invert. In addition, with the increase of the fault displacement, the axial strain of the secondary lining increases as well, of which the main part shows the tensile strain. Interestingly, with the decrease of the crossing angle, the axial strain gradually changes from the tensile strain to the compressive strain, which is consistent with the direction of the fault angle. Furthermore, the tensile and compressive damage of the secondary lining increases with the increase of movement distance. At the same time, the tensile damage along the tunnel ring develops, and the compressive damage propagates mainly in tunnel vault and invert. With the decrease of the crossing angle, the degree of the tensile damage in the lining reduces, as well as its range. The compressive damage area of the lining develops from the vault and inverted arch to the tunnel wall on both sides, which has a trend of penetrating the side walls on both sides. The distribution area and maximum value of the overall lining damage indices in tensile (OLDT) and overall lining damage indices in compressive (OLDC) increase with the increase of fault movement distance. With the decrease of the crossing angle, the distribution range and maximum value of OLDT decrease, and the distribution range of OLDC increases, while the maximum value basically remains the same. The research results of the present work can provide reference for the antidislocation design of railway tunnels crossing strike-slip faults.

Dynamic behavior of fault tunnel lining under seismic loading conditions

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Study on Response and Influencing Factors of Shield Single/Twin Tunnel under Seismic Loading using FLAC 3D

Experimental study on the damage performance and forced response of concrete lining in fault-crossing tunnel

Seismic energy response and damage evolution of tunnel lining structures

Seismic Dynamic Response and Lining Damage Analysis of Curved Tunnel under Shallowly Buried Rock Strata

Influence of relative distance between fault and tunnel on dynamic response of tunnel: An experimental and numerical investigation

Shaking Table Test on the Tunnel Dynamic Response under Different Fault Dip Angles

Failure and deformation mode for soil and tunnel structure crossing multiple slip surfaces of strike-slip fault in model test

Study on supporting time of tunnel lining in thin-layered rock mass

Numerical Modeling of Seismic Responses and Seismic Measures of Tunnel Crossing a Fault Zone: A Case Study

Study on Damage Evolution of Tunnel Lining under Strike-Slip Fault Movements

Aseismic Performance Analysis of Composite Lining Embedded in Saturated Poroelastic Half Space

Analysis of Damage Mechanism of Tunnel Lining Structure under the Coupling Action of Active Fault

Influence of Fault on the Surrounding Rock Stability of A Tunnel: Location and Thickness

Study on Dynamic Response Characteristics and Damage Mechanism of Tunnel Lining at Entrance of Shallow Bias Tunnel

Seismic Response and Security Assessment of Cross-Fault Hydraulic-Tunnel Lining Structures

Experimental study on the mechanical behavior of utility tunnel with flexible joints passing through active thrust fault

Seismic response and deformation mechanism of near-fault deep tunnels in a strong earthquake area

Deformation and failure of overburden soil subjected to normal fault dislocation and its impact on tunnel

Seismic response of tunnel near fault fracture zone under incident SV waves