Abstract:Variation in the local thermal history during the Laser Powder Bed Fusion (LPBF) process in Additive Manufacturing (AM) can cause micropore defects, which add to the uncertainty of the mechanical properties (e.g., fatigue life, tensile strength) of the built materials. In-situ sensing has been proposed for monitoring the AM process to minimize defects, but successful minimization requires establishing a quantitative relationship between the sensing data and the porosity, which is particularly challenging with a large number of variables (e.g., laser speed, power, scan path, powder property). Physics-based modeling can simulate such an in-situ sensing-porosity relationship, but it is computationally costly. In this work, we develop Machine Learning (ML) models that can use in-situ thermographic data to predict the micropore of LPBF stainless steel materials. This work considers two identified key features from the thermal histories: the time above the apparent melting threshold (τ) and the maximum radiance (Tmax). These features are computed, stored for each voxel in the built material, and then used as inputs. The binary state of each voxel, either defective or normal, is the output. Different ML models are trained and tested for the binary classification task. In addition to using the thermal features of each voxel to predict its own state, the thermal features of neighboring voxels are also included as inputs. This is shown to improve the prediction accuracy, which is consistent with thermal transport physics around each voxel contributing to its final state. Among the models trained, the F1 scores on test sets reach above 0.96 for Random Forests. Feature importance analysis based on the ML models shows that Tmax is more important to the voxel state than τ. The analysis also finds that the thermal history of the voxels above the present voxel is more influential than those beneath it. Our study significantly extends the capability of using in-situ thermographic data to predict porosity in LPBF materials. Since ML models are fast, they may play integral roles in the optimization and control of such AM technologies.

Prediction of microstructural defects in additive manufacturing from powder bed quality using digital image correlation

Predicting Laser Powder Bed Fusion Defects Through In-Process Monitoring Data and Machine Learning

Powder bed monitoring via digital image analysis in additive manufacturing

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

Defects and anomalies in powder bed fusion metal additive manufacturing

Online Quality Monitoring in Material Extrusion Additive Manufacturing Processes Based on Laser Scanning Technology

Prediction of spatter-related defects in metal laser powder bed fusion by analytical and machine learning modelling applied to off-axis long-exposure monitoring

Predicting defects in laser powder bed fusion using in-situ thermal imaging data and machine learning

In-situ visual monitoring for multi-scale defects detection in laser powder bed fusion

Research on an Online Monitoring Device for the Powder Laying Process of Laser Powder Bed Fusion

In-situ porosity prediction in metal powder bed fusion additive manufacturing using spectral emissions: a prior-guided machine learning approach

Physics-informed machine learning and mechanistic modeling of additive manufacturing to reduce defects

Feature-based volumetric defect classification in metal additive manufacturing

Analytical Probabilistic Modeling of Additive Manufacturing-Induced Process Defects and Experimental Validation

In situ real time defect detection of 3D printed parts

An Image-Based Transfer Learning Approach for Using In Situ Processing Data to Predict Laser Powder Bed Fusion Additively Manufactured Ti-6Al-4V Mechanical Properties

Defect Classification for Additive Manufacturing with Machine Learning

In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing

A Preliminary Study Of In-Situ Defects Measurement For Additive Manufacturing Based On Multi-Spectrum

Mitigation of lack of fusion defects in powder bed fusion additive manufacturing

Toward in-situ flaw detection in laser powder bed fusion additive manufacturing through layerwise imagery and machine learning