Abstract:Lithium ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell State of Charge (SoC) and its voltage in a battery pack is known as Cell Balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. The buck converter is constructed from two MOSFET switches, one turned on for charging the cells and the other one is used for discharging the cells. An algorithmic model that measures the individual cell voltages based on charge equalization is developed for a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. It is found that this algorithmic model produces a state of charge of 2.5% among the cells in a short period as compared to the conventional cell balancing technique. This parameter directly defines the cell equalization time and thus it is found that the system responds faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period. Lithium‐ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell state of charge (SoC) and its voltage in a battery pack is known as cell balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. A buck converter along with a pair of MOSFET switches for each cell, one turned on for charging the cell and the other one turned on while discharging the cell is used in this experiment. An algorithmic model suitable for reconfigurable battery systems that measures the individual cell voltages and is developed for balancing a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. A state of charge of 25% is maintained across the cells and when SoC value drops below this even a difference of 0.02% is sensed by the algorithm to initiate balancing function. This balancing is found to take 275 ms to balance three 3.7 V batteries and thus the model is found to respond faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period.

Active voltage balancing circuit using single switched‐capacitor and series LC resonant energy carrier

Capacitor Voltage Balancing for Multilevel Dual-Active-Bridge DC-DC Converters.

Active Cell Balancing of Lithium-ion Battery Pack Using Dual DC-DC Converter and Auxiliary Lead-acid Battery

Two-Mode Active Balancing Circuit Based on Switched-Capacitor and Three-Resonant-State LC Units for Series-Connected Cell Strings

An Active State of Charge Balancing Method With LC Energy Storage for Series Battery Pack

Investigation of active cell balancing performance for series connected lithium‐ion cells in electric vehicle applications

Super-capacitor applications on series lithium batteries for robot power management

A multi-winding transformer-based active cell equalizer with self-driven switches for series-connected lithium-ion batteries and super-capacitors

Novel Active Battery Balancing Methodologies for Lithium Batteries: An Experimental Comparative Analysis

Series-Connected Power Devices in a CLLC Resonant Converter for DC Transformer Applications

An Active Direct Cell-to-Cell Balancing Circuit in Continuous Current Mode for Series Connected Batteries

An Active Cell-to-cell Balancing Circuit with Planar Coupled Inductors for Series Connected Batteries

DC Voltage Source Based on a Battery of Supercapacitors with a Regulator in the Form of an Isolated Boost LCC Resonant Converter

Capacitor Voltage Balancing Algorithm with Redundant Level Modulation for a Five Level Converter with Reduced Device Count

A Low Cost Battery Equalizing Scheme with Buck-Boost and Series Lc Converter Using Synchronous Phase-Shift Controller

Voltage Equalization Technique Using Multistacked-Zetas Converter for Series Connected Super-capacitor

Capacitor Voltage Balancing Control for a Novel 5-Level Dual Active Bridge Converter

A Voltage Balancing Method for Series-Connected Power Devices in an LLC Resonant Converter

A novel active cell balancing topology for serially connected Li-ion cells in the battery pack for electric vehicle applications

Bidirectional Constant Current String-to-Cell Battery Equalizer Based on L2C3 Resonant Topology

An Active Equalization Technique Based on Flyback Converter Topology