Abstract:Direct current (DC) bias induced by the DC transmission and geomagnetically induced current is a critical factor in the abnormal operation of electrical equipment and is widely used in the field of power transmission and distribution system state evaluation. As the main affected component, the vector magnetization state of a transformer core under DC bias has rarely been studied, resulting in inaccurate transformer operation state estimations. In this paper, a dynamic vector hysteresis model that considers the impact of rotating and DC-biased fields is introduced into the numerical analysis to simulate the distribution of magnetic properties, iron loss and temperature of the transformer core model and a physical 110 kV single-phase autotransformer core. The maximum values of B, H and iron loss exist at the corners and T-joint of the core under rotating and DC-biased fields. The corresponding maximum value of the temperature increase is found in the main core limb area. The temperature rise of the 110 kV transformer core under various DC-biased conditions is measured and compared with the FEM (Finite Element Method) results of the proposed model and the model solely based on the magnetization curve B||H. The calculation error of the temperature rise obtained by the improved model is approximately 3.76-15.73% and is much less than the model solely based on magnetization curve B||H (approximately 50.71-66.92%).

Improvement of core loss model under AC–DC hybrid excitation and verification based on TEAM P21 extended model

Determination of the Contribution of Dc Component to Stray-Field Loss under Ac-Dc Hybrid Excitation.

Loss Calculation of Iron Core under DC Bias and Harmonic Disturbance Conditions

Analytical Study and Corresponding Experiments for Iron Loss Inside Laminated Core under Ac-Dc Hybrid Excitation.

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

Evaluation of the Calculation Method for Stray Losses in Structural Parts of HVDC Converter Transformers

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply

A comparative study of J–A and Preisach improved models for core loss calculation under DC bias

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

A modified jiles-atherton model for estimating the iron loss of electrical steel considering DC bias

Core loss analysis of soft magnetic composite under non-sinusoidal excitation based on finite element models

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

Simulation Model for Loss Measurement of Electrical Steel and Study on the Influence of Harmonics

A Practical Hybrid Hysteresis Model for Calculating Iron Core Losses in Soft Magnetic Materials

Core loss measurement and comparative analysis for soft magnetic materials under complex non-sinusoidal excitations

Characterization and Modeling of Soft Magnetic Materials for Improved Estimation of PWM-Induced Iron Loss

Calculation Method of Core Loss Under Intermediate Frequency Excitation

Iron Loss Model Under DC Bias Flux Density Considering Temperature Influence