Abstract:The most common technology for the manufacture of aluminum parts and blanks is casting in a chill mold. To determine ways to improve casting technology, it is necessary to analyze the possibility of changing the parameters that affect the reduction of production costs (reduction of energy consumption, material consumption, increase productivity) and improve the quality of casting. The thermal regime of the metal form determines the productivity of the process, the duration of curing of the casting, its quality, durability of the chill mold. The analysis of the work of the chill mold for the manufacture of castings Pump Housing showed that when the forms are filled, the most heated new portions of metal meet on their way to the central core. That is, when pouring the mold, the central core is heated the most, especially in the lower part. This circumstance hinders the process of directed curing and can lead to shrinkage defects. In addition, the higher the temperature of the mold, the slower the casting will crystallize and the worse its structure and mechanical properties will be. Based on the analysis of structures and methods of cooling molds, the method of controlled cooling of the central core by air is substantiated. A new design of the core has been developed, which provides adjustable air cooling of the chill mold by connecting the central core through a valve to the pneumatic system of the shop. 3D-models of details and assembly drawings of the central core of a new design are developed. A computer study of the air flow in the core channels in SolidWorks Flow Simulation was performed. The results of parametric modeling of air flow in the channels of the Central core showed the maximum air flow rate during cooling 0.371 kg / s, the heat content of air when cooled 25081 J / s. Evaluation of the cooling efficiency of the developed chill mold design showed that when using air cooling of the central core with cooling air at its maximum consumption, 41% of heat is removed. Thus, the developed design of the cooled central core allows to increase the productivity of the casting process, improve the quality of casting by improving the structure and mechanical properties of the casting, as well as increase the life of the chill mold. But the obtained research results are of a recommendatory nature and require practical verification in the production environment. In addition, the simulation did not take into account the change in core temperature due to its heat exchange with the melt. Given all this, there is a need for further study of the effect of regulated air cooling on the thermal regime of the chill mold.

POSSIBILITIES OF OBTAINING CASTINGS FROM ALUMINUM FOAM WITH THE USE OF "DRY ICE" GRANULES

Investigation of Thermal Conditions of Porous Aluminum Formation

The research of the processes of formation of porous non-ferrous metals

Al and A356 Alloy Foam Castings Modified with Low Concentrations of Nano-Sized Particles: Structural Study and Compressive Strength Tests

Research on frozen sand mold casting technology for complex thin-walled aluminum alloy castings

Research and Computer Modeling of the Process of Casting Parts Alloys

Manufacturing of open-cell aluminum foams via infiltration casting in super-gravity fields and mechanical properties

A Preliminary Study on Adhesion on Steel Cylinder Filled with Aluminum Foam

Production of Closed-Cell Foams out of Aluminum Chip Waste: Mathematical Modeling and Optimization

Aluminum Foam Sandwich: Pore Evolution Mechanism Investigation and Engineering Preparing Optimization

Fabrication and characterization of aluminum foam reinforced with nanostructured γ-Al2O3 via friction stir process for enhanced mechanical performance

Preparation of complex shaped aluminum foam by a novel casting-foaming method

Preparation of Shaped Aluminum Foam Parts by Investment Casting

Preparation of Metal Foam Using Casting Technology

Research on Key Technologies for Batch Preparation of Aluminum Foam Slabs by Melt Foaming Process

PROGRESS IN CONSTITUTIVE BEHAVIOR OF ALUMINUM FOAM

Fabrication of Two-Layer Aluminum Foam Consisting of Dissimilar Aluminum Alloys Using Optical Heating

Mesostructural Design and Manufacturing of Open-Pore Metal Foams by Investment Casting

Improving the Productivity of the Casting Process by Regulating the Thermal Regime of the Chill Mold on a Basis of Computer Investigation of the Air Flow in the Channels of the Casting Core

Investigation of technology schemes for the production of cast composite functional materials

Preparation Technology of Aluminum Foam Sandwich Panels by Powder Metallurgy and Optimization of Cellular Structure