Abstract:<p>The self-piercing riveting (SPR) owns more advantages of acquiring high joint strength for similar and dissimilar metal sheets than the traditional spot welding. However, the conventional SPR may not obtain good joints quality for AA7075-T6 aluminum alloy sheets due to its high strength and low ductility. Thereby the possibility of self-piercing riveting under elevated temperatures makes improving the riveting quality and mechanical behavior has thus been raised as an interesting topic. In this paper, a modified thermal self-piercing riveting (T-SPR) technology for AA7075-T6 sheets was proposed based on the process that the substrate was firstly heated and conducted by the subsequent riveting and heat treatment process. The post-riveted quality and quasi-static mechanical behavior of T-SPR joints under designated temperatures were intrinsically investigated by quantifying the interlocking parameters and the single-lap shear test to assess the optimized riveting temperature. Subsequently, an improved Arcan test was employed to investigate the quasi-static mechanical behavior of cruciform joints under different loading conditions. The failure modes of cross-lap joints were analyzed in detail by combining with experiments and FE simulations coupled with Johnson-Cook (J-C) strength and damage models. The influences of loading angle and loading speed on the mechanical behavior of T-SPR joints were further discussed. The outcomes show that the joinability of T-SPR for AA7075-T6 aluminum alloys can be largely improved by increasing the riveting temperature to 400°C. The loading angle and loading speed also have a significant impact on the mechanical behaviors and failure modes of T-SPR joints under quasi-static loading conditions.</p>

Impact of Stack Orientation on Self-Piercing Riveted and Friction Self-Piercing Riveted Aluminum Alloy and Magnesium Alloy Joints

Mechanical Properties of B1500HS/AA5052 Joints by Self-Piercing Riveting

Effect of adhesive application on friction self-piercing riveting (F-SPR) process of AA7075-T6 aluminum alloy

Friction self-piercing riveting (F-SPR) of aluminum alloy to magnesium alloy using a flat die

Towards joinability of thermal self-piercing riveting for AA7075-T6 aluminum alloy sheets under quasi-static loading conditions

Effects of Residual Stresses on the Fatigue Lifetimes of Self-Piercing Riveted Joints of AZ31 Mg Alloy and Al5052 Al Alloy Sheets

Influence of process parameters and heat treatment on self-piercing riveting of high-strength steel and die-casting aluminium

Numerical investigation of joinability and forming quality improvement on self-piercing riveting process with varying sheet stack combinations

A comparative study on self-piercing riveting and pre-holed self-piercing riveting of high-strength steel and aluminum alloy

Effect of process parameters on joint quality and mechanical properties of local-thickened self-piercing riveted steel and die-casting aluminum joints

Friction stir riveting (FSR) of AA6061-T6 aluminum alloy and DP600 steel

Formation mechanism and mechanical strength evaluation of hybrid riveted/solid-state bonded aluminium alloy joint

Effect of edge riveting on the failure mechanism and mechanical properties of self-piercing riveted aluminium joints

Experimental and numerical investigation on the effect of process parameters on joint strength and failure behavior of self-piercing riveted steel/aluminium hybrid joints

Self-piercing rivetability of steel/aluminum and its improvement using reinforcing plate

Investigation of Joint Quality 980 MPa Grade GA Steel Sheet and 5052 Aluminum Alloy by Electromagnetic Self-Piercing Riveting

The Effect of Setting Velocity on the Static and Fatigue Strengths of Self-piercing Riveted Joints for Automotive Applications

Fatigue strength of self-piercing riveted joints of carbon fiber reinforced composite and Al5052 alloy plates

Distortion Analysis for Self-Piercing Riveting of Aluminium Alloy Sheets

Dynamic Behavior of Self-Piercing Riveted and Mechanical Clinched Joints of Dissimilar Materials: an Experimental Comparative Investigation

Friction stud riveting (FSR) of thick high-strength aluminum alloy structure