Abstract:Partial discharges (PD) measurements provide valuable information for the condition assessment of the high voltage insulation systems. PD tests have become a fundamental tool to determine the status of high voltage elements, contributing to the quality assurance in high voltage equipment. Some reasons for the increasing usage of DP tests are based in the effectiveness of the new developments presented to achieve more reliable diagnosis. During the last five decades different approaches have been developed and applied to PD measurement and processing techniques. Significant efforts have been made to deal with the most common problems arising in on-site and on-line measurements: high levels of noise and interferences, the emergence of different PD sources simultaneously and the difficulty of locating the site of the defects and to identify the type of defects. In order to overcome all these drawbacks, this paper proposes an efficient method based in advanced measuring and diagnosis techniques, with the aim to achieve a proper sensitivity in PD measurements and an accurate assessment of the elements insulation condition. In PD measurements the main factors that condition the signal acquisition, the subsequent processing and the capability to obtain an accurate diagnosis are: selection of a suitable detection technique together with the type of sensors and their bandwidth, implementation of an effective noise filtering tool, development of a defect localization method and implementation of PD classification techniques for pattern recognition and defect identification. All these factors have been considered in this study and a complete measuring method together with powerful diagnostic tools are presented. Measurements in a test object consisting in a one-phase cable system were accomplished with real insulation defects, with the aim to show the effectiveness of the proposed method and the optimized analysis techniques.

A Study of the Pulse Propagation Behavior in a Large Turbo Generator

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

Experimental Study of Partial Discharge Pulses Propagation in Stator Winding of Hydro Generator

Experimental study of the pulse propagation in turbine generator stator windings

On-line Measurement for Power Angle and Circuit Parameter in the Turbo Steam Generator with the FEM Based

Study on pulse current of typical PD models in power transformer

Assessment of stator winding insulation degradation in large generator by ultra-wideband PD detection

Study on the Influence of Pulse Propagation in Transformer Winding on Partial Discharge Pattern Recognition

Frequency Band of Pulse Current Method for the Measurement of PD in Transformer

Pd Pulse Burst Characteristics in Differently Aged Transformer Oils under Ac Conditions

Propagation Characteristics of Partial Discharge Pulses in the Cable

Transmission Character of Pulse-Shaped Noise in Insulation Monitoring for Turbo-Generators

Design of Transmission Line and Electromagnetic Field Sensors for DC Partial Discharge Analysis

TYPICAL PULSE SHAPE AND FREQUENCY CHARACTERISTIC OF THE PD SIGNAL IN OIL-PAPER INSULATION

Experimental Study of the Path Characteristics of Partial Discharge Pulses in Generator Stator Windings and in the SSC

Locating Partial Discharge in Power Transformer by Electrical Method

Advanced techniques for on-line PD measurements in high voltage systems

Detection and Identification Technologies of Wide Band Partial Discharge

PD Electromagnetic Emission of Turn-to-turn Insulation in Inverter-fed Motor

Propagation Attenuation Properties of Partial Discharge in Typical In-Field GIS Structures

PULSE PROPAGATION MODEL OF TURBINE GENERATOR STATOR WINDINGS