Abstract:AI-based bi-input predictive models have been executed to forecast the bulk density, linear and volumetric shrinkages and desiccation cracking of HSDA-treated black cotton soil (BCS) for sustainable subgrade construction purposes. The BCS was characterised and classified as A-7 group soil with high plasticity and poorly graded condition. Sawdust ash was obtained by combusting sawdust and sieving through 2.35 mm aperture sieve. It was further activated by blending it with pre-formulated activator material (a blend of 8 M NaOH solution and NaSiO 2 in 1:1 ratio) to derive waste-based HSDA. The HSDA was further used in wt % of 3, 6, 9, and 12 to treat the BCS. The treated samples were compacted in the standard proctor moulds, cured for 24 h and extruded. The desiccation tests were then performed on the prepared specimens by drying them at a temp of 102°C for 30 days and behavioural changes in weight, height, diameter, average crack development, etc., were taken throughout the period. Multiple data sets were collected for the references test, and treated specimens of 3, 6, 9, and 12% wt HSDA of the soil for 30 drying days. XRF and SEM tests were also conducted to determine the pozzolanic strength via the chemical oxide composition, three chemical moduli (TCM) and the microstructural arrangement of the experimental materials and the treated BCS. The XRF tests showed that the experimental materials had less pozzolanic strength, which improved with the treated blends thereby forming stabilised mass of BCS. Also, it showed the silica moduli of the TCM dominated the stabilisation of the soil with waste-based HSDA. SEM tests showed increased formation of ettringite and gels with the addition of the HSDA. The data collected was subjected intelligent models' prediction using ANN, GP and EPR for the four outcomes; BD, CW, LS and VS of the HSDA-treated BCS. The models' performance showed that EPR outclassed the other techniques in predicting BD and CW with accuracies of 98.2% and 92.7% and minimal error, while ANN outclassed the other techniques in predicting LS and VS with accuracies of 98.8% and 99.3% and minimal error, respectively.

Determination of Effective Wood Ash Proportion for Black Cotton Soil Improvement

Geopolymer Soil Stabilization Using Acacia Ash for Strength Improvement

Experimental study on mechanical properties of stabilized artificial organic soil

Experimental Research On Solidification Of Ningbo Soil With Its Different Initial Status

Computational Modeling of Desiccation Properties (CW, LS, and VS) of Waste-Based Activated Ash-Treated Black Cotton Soil for Sustainable Subgrade Using Artificial Neural Network, Gray-Wolf, and Moth-Flame Optimization Techniques

Effect of Bioprecipitation and Ferrochrome Ash Stabilization on the Strength of Black Cotton Soil

The stabilisation of clayey soil by using sawdust and sawdust ash

Strength and Durability Characteristics of Cement and Class F Fly Ash-Treated Black Cotton Soil

AI (ANN, GP, and EPR)-based predictive models of bulk density, linear-volumetric shrinkage & desiccation cracking of HSDA-treated black cotton soil for sustainable subgrade

Morphology validation on strength properties of black cotton soil stabilized with rice husk ash and carbide lime in the presence of sulphate

Effect of Wetting and Drying Cycle on the Behavior of Teff Straw Ash-Stabilized Expansive Soil

Experimental study on stabilization of humus-containing soft soil

Effect of Stabilization/solidification on Mechanical and Phase Characteristics of Organic River Silt by a Stabilizer

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Experimental study on new variety of cement-stabilized soil

Utilization of Sengon Wood Ash for Soil Stabilization and Its Impact on Unsoaked CBR Value

Experimental Study on Expansive Subgrade Clay Soils Stabilized With Sugarcane Bagasse Ash and Nonwoven Geotextile

Utilization of Nano Silica and Plantain Leaf Ash for Improving Strength Properties of Expansive Soil

Physical-hydric properties of Oxisol and Quartzipsamment associated with the application of wood ash

Identifying the microstructure and mechanical properties of expansive soil stabilized using fly ash and waste foundry sand

Experimental research on mechanics properties of black cotton soil and bearing features of single pile