Abstract:Regeneration of spent lithium-ion battery (LIB) electrode materials is essential for sustainable development of the LIB energy storage sector and resource management of the critical metals such as Li, Co, Ni, and Mn. Enormous use of LIBs has been seen in the last two decades in portable electronic devices. In addition, now it is predicted that LIBs will be exploited in electric vehicles and stationary energy storage systems in the coming decades. Wider exploitation of LIB energy storage technologies creates an alarming situation, especially for the resource management of critical metals and the environment. In this work, we report the direct regeneration of a spent lithium cobalt oxide (LCO) cathode material. The deficiency of Li concentration in spent cathode material is fulfilled by the solid-state regeneration process just by heating with the required amount of Li2CO3 at 740 °C for 6 h. In particular, the Li void in the defective LCO crystal structure has been repaired, and the morphology is restored into the pristine LCO. Elemental analysis confirmed the increase of Li content to 7.4% in the relithiated cathode material in comparison to the spent cathode (5.28% Li). The X-ray diffraction study revealed the repair of degraded phase cobalt oxide to pristine phase LCO. XPS analysis also indicated the repair of the degraded phase from Co2+ to Co3+ in the regenerated LCO. Scanning electron microscopy analysis showed the improvement of microcrystals in the regenerated LCO. Cyclic voltammetry analysis showed the enhancement of electrochemical properties in the regenerated LCO and exhibited an enhanced initial charge specific capacity to 148.31 mAh/g at 0.1C rate in comparison to the spent LCO. This work demonstrated a simple and cost-effective regeneration process of spent LCO compared to the pyrometallurgy and hydrometallurgy where the critical metals are recycled in the form of alloys and individual salts, respectively.

Recovery and regeneration of lithium cobalt oxide from spent lithium-ion batteries through a low-temperature ammonium sulfate roasting approach

Recycling of spent lithium nickel cobalt manganese oxides via a low-temperature ammonium sulfation roasting approach

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Recovery of degraded LiCoO2 through a CO2 -assisted low-temperature thermal reduction approach

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route

A Simplified Process for Recovery of Li and Co from Spent LiCoO2 Cathode Using Al Foil As the in Situ Reductant

Study on the reduction roasting of spent LiNixCoyMnzO2 lithium-ion battery cathode materials

Preferentially selective extraction of lithium from spent LiCoO2 cathodes by medium-temperature carbon reduction roasting

NaOH-assisted low-temperature roasting to recover spent LiFePO4 batteries

Selective lithium extraction of cathode materials from spent lithium-ion batteries via low-valent salt assisted roasting

Sulfation Roasting Mechanism for Spent Lithium-Ion Battery Metal Oxides Under SO2-O2-Ar Atmosphere

Improved recovery of lithium from spent lithium-ion batteries by reduction roasting and NaHCO3 leaching

Preferentially selective recovery of lithium from spent LiCoO2 by sulfation roasting of MnSO4

A novel method for carbon removal and valuable metal recovery by incorporating steam into the reduction-roasting process of spent lithium-ion batteries

Recycling of valuable metals from spent lithium-ion batteries by self-supplied reductant roasting

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Co-precipitation preparation of Ni-Co-Mn ternary cathode materials by using the sources extracting directly from spent lithium-ion batteries

Unveiling the lithium deintercalation mechanisms in spent lithium-ion batteries via sulfation roasting

Separation and Regeneration of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Materials from Spent Lithium-Ion Batteries: A Facile Process

Solid-State Direct Regeneration of Spent Lithium Cobalt Oxide Cathodes for Li-Ion Batteries

Recycling of Li, Co from spent LiCoO2 cathode materials through a low temperature urea-assisted sulfation roasting approach