Clean recycling of Zn-bearing slags by a plasma fuming process
Zhongfu Cheng,Muxing Guo,Bart Blanpain,Annelies Malfliet
DOI: https://doi.org/10.1016/j.cej.2024.152838
IF: 15.1
2024-06-10
Chemical Engineering Journal
Abstract:The present study focuses on developing a plasma-intensified slag-fuming process for recycling Zn-bearing slags. A pilot trial was conducted in a plasma-fuming furnace, and thermodynamic calculations were performed to identify optimal operating parameters. The desired reaction atmosphere was achieved by controlling the C 3 H 8 -to-air ratio at 0.050 and 0.071 for the feeding and reducing stages, respectively. Zn fuming was predominantly achieved during the reducing stage, while Pb fuming was mainly realized in the feeding stage. After slag fuming, valuable elements (Zn, Pb, In, and Ge) and hazardous elements (As, Hg, and Cd) were recovered in the fume dust as oxides. The yields for Zn, Pb, In, and Ge were all higher than 97 %, and the cleaned slag exhibited limited quantities of Pb (23 ppm), As (76 ppm), Hg (<1 ppm), and Cd (<10 ppm), making it suitable for consideration in building applications.
engineering, chemical, environmental