Abstract:This study proposes a research approach to reduce wall stress by optimizing the drill rod structure. Through theoretical analysis, numerical simulation, and industrial tests, a stress model for the drill rod inside the hole was established, and a wall stress equation was derived. The effects of various parameters on wall stress were analyzed. The study suggests optimizing the drill rod structure to reduce the disturbance‐induced wall stress. Gas extraction drilling is a necessary measure for managing gas hazards. For soft coal seams where gas extraction drilling holes are prone to collapse, it is believed that drill rod disturbance is the main cause of hole collapse. This study proposes a research approach to reduce wall stress by optimizing the drill rod structure. Through theoretical analysis, numerical simulation, and industrial tests, a stress model for the drill rod inside the hole was established, and a wall stress equation was derived. The effects of various parameters on wall stress were analyzed. The study suggests optimizing the drill rod structure to reduce the disturbance‐induced wall stress. SolidWorks was used for drilling stress simulation, and a four‐winged concave groove drill rod was developed. After strength verification, comparative industrial tests were conducted. The research results show that as the line density increases, the wall stress of the drilling hole increases. As the length of the suspended section increases, the wall stress initially decreases and then increases. With increasing drilling thrust, wall stress increases linearly, and the growth rate is greater with a larger diameter difference between the drill hole and the drill rod. Numerical simulation results indicate that the critical point maximum stress at the hole entrance, the critical point maximum stress at the hole bottom, and the average stress at the bottom section of the four‐winged concave groove drill rod with a concavity of 5 are significantly reduced compared to those of circular and grooved drill rods. Industrial test results show that using the four‐winged concave groove drill rod significantly reduces the extent of hole collapse. This study provides a reference for addressing the issue of hole collapse in gas extraction drilling for soft coal seams.

Study on the design of internal flash cleaning device in long diameter drill pipe used in coal mine

Investigation on the design of atomization device for coal dust suppression in underground roadways

A novel reverse circulation drilling device for the underground sampling to soft coal

Hole flushing device for coal mine downhole gas extraction drill holes

Design and Optimization of a Novel Dust Collection Device for Underground Dry Drilling Based on Numerical Simulation and Field Testing

A Study on the Dynamic Adjustment of Pressure Relief Gas Drainage Drilling in Mined-Out Areas

Improvement of drilling quality using precision directional drilling technology

Study of integrated vortex ventilation and dust removal system in mechanized excavation face

Coal mine downhole drilling hole dust-reducing device

A novel technology for high-efficiency borehole-enlarging to enhance gas drainage in coal seam by mechanical cutting assisted by waterjet

Test Research on Safety Technical Standards of Non-metal Gas Drainage Pipe for Coal Mine

Underground Intelligent Dry Dust Collector in the Coal Mine

Application of Drum-type Tub-cleaner in Gaozhuang Mine

A Novel In-Seam Borehole Discontinuous Hydraulic Flushing Technology in the Driving Face of Soft Coal Seams: Enhanced Gas Extraction Mechanism and Field Application

Study on Erosion Wear of Single- and Double-Orifice Throttling Tools for Underground Coal Gasification

Application of Treatment for Deep Hole Drilling Debris in Gas-Rich Soft Coal Seams

Research on Anti-reflection Measures of Hydraulic Reaming of Low Permeability Soft Coal Seam in Goutou Coal Mine

Design and implementation of a coal-dust removal device for heavy-haul railway tunnels

Study on Optimization Design of Coal Filling Mining Pipeline Parameters

Design and application of a dust suppression technology of the forcing air curtain in fully mechanized rock tunnelling faces

Mechanism and application of drill pipe bending induced borehole collapse in soft coal seam drilling