Abstract:Grouting is always used in mine water plugging, reinforcement, and other disaster prevention projects. The diffusion mechanism of slurry in fractured rock is affected by geological environment and slurry performance, which should be revealed and characterized better. Based on the two-phase flow diffusion theory, a slurry diffusion model considering flowing water condition was established for a blocking area of a fracture zone in one case from China. The feasibility of two-phase flow model in grouting diffusion calculation was analyzed. The diffusion model in dynamic water environment was studied, and the diffusion range varying with time in the grouting area of Zhangji Coal Mine was explored. The optimization method of multi grouting holes was put forward, and the influence of water flowing was discussed. The results show that the slurry diffusion calculated by the two-phase flow model was feasible and consistent with the experimental study. The dynamic water can change the conventional circular diffusion state of slurry, but its pattern was oval and leaf type. There were different penetration distances in directions, and typical grouting voids were made on the side and upstream. When the single-hole grouting was carried out, the predetermined value can be achieved in the height range, but it was only about 15 m on the side because of the water flowing, which cannot meet the requirements. The optimization scheme of grouting was put forward, which adopted multiple grouting holes in the long side, and grouting in different directions and periods to avoid the possible problems of multihole intersection. The rationality and effectiveness of the proposed optimization method were verified through the calculation of water yield and analysis of cement composition from the drilling core in the grouted zone. In the grouting process, the water flowing has double effects, which has a significant role in promoting and scouring along the flow direction, but there is a significant weakness in the side diffusion. It is very important to realize the rational use of the dynamic water through the optimization scheme. This study is an important basic work of grouting mechanism, and it is expected to promote the development of grouting technology and application of two-phase fluid-solid coupling theory.

Design and Application of a Composite Grouting Equipment in Coal Mines

Precise application of grouting technology in underground coal mining: water inrush risk of floor elimination

Research status and future trends on surface pre-grouting technology in reforming wall rock of vertical shafts in coal mines in China

Coal Wall Spalling Mechanism and Grouting Reinforcement Technology of Large Mining Height Working Face

Groundwater runoff pattern and keyhole grouting method in deep mines

High Mining Face Flexible Reinforcement to Prevent Coal Wall Spalling by Cuttable Aluminum–Plastic Pipe Pre-Grouting

Theory, technology and application of grouted bolting in soft rock roadways of deep coal mines

Development and application of new composite grouting material for sealing groundwater inflow and reinforcing wall rock in deep mine

Comprehensive Evaluation of the Reinforcement Effect of Grouting in Broken Surrounding Rock in Deep Roadways

Experiment and Application Study on High-Performance Grouting Material Used to Solve the Floor Heave Problem of Broken Soft Rocks

Mechanism of and Prevention Technology for Water Inrush from Coal Seam Floor under Complex Structural Conditions—A Case Study of the Chensilou Mine

Performance Research of Materials and Engineering Application of Overburden Strata Separation-Zone Grouting Technology

A reinforcement method of floor grouting in high-water pressure working face of coal mines: a case study in Luxi coal mine, North China

Evolution and control of overburden fracture in extra-thick coal seam mining with hard roofs: ground grouting sealing and case study

Grouting Mechanism in Water-Bearing Fractured Rock Based on Two-Phase Flow

Comprehensive Treatment Methods of Floor Heave Disasters in Mining Areas of China

Research and application of high-pressure water jets drilling and repairing failure drainage borehole for enhancing coalbed methane recovery in underground coal mines

Grouting anchor cable active advanced support technology for mining roadways

Green coal mining under buildings by overburden grout injection for coalmine sustainable development of central China

Physical test of fracture development in the overburden strata above the goaf and diffusion process of permeable grout slurry

Application of integrated drilling and stamping technology in gas extraction through layer drilling