Abstract:This paper describes the design of a new magnetic flux leakage (MFL) inspection tool that performs an inline inspection to detect and characterize both metal loss and mechanical damage defects. An inspection tool that couples mechanical damage assessment as part of a routine corrosion inspection is expected to have considerably better prospects for application in the pipeline industry than a tool that complicates existing procedures. The design is based on study results that show it is feasible to detect and assess mechanical damage by applying a low magnetic field level in addition to the high magnetic field employed by most inspection tools. Nearly all commercially available MFL tools use high magnetic fields to detect and size metal loss such as corrosion. A lower field than is commonly applied for detecting metal loss is appropriate for detecting mechanical damage, such as the metallurgical changes caused by impacts from excavation equipment. The lower field is needed to counter the saturation effect of the high magnetic field, which masks and diminishes important components of the signal associated with mechanical damage. Finite element modeling was used in the design effort and the results have shown that a single magnetizer with three poles is the most effective design. Furthermore, it was found that for the three-pole system the high magnetization pole must be in the center, which was an unexpected result. The three-pole design has mechanical advantages, including a magnetic null in the backing bar, which enables installation of a pivot point for articulation of the tool through bends and restrictions. This design was prototyped and tested at Battelle’s Pipeline Simulation Facility (West Jefferson, OH). The signals were nearly identical to results acquired with a single magnetizer reconfigured between tests to attain the appropriate high and low field levels.

Study of Defects in the Petrochemical Storage Tank Floor using the Magnetic Flux Leakage (MFL) Technique

Data Acquisition and Analysis System for a Magnetic Flux Leakage Tank Floor Corrosion Scanner

Development of a High Resolution MFL Inspection System for Tank Floors

A Portable Magnetic Flux Leakage Detector for Tank Floors

Methods of Flaws Location and Visualization for Tank Floors Inspection

Enhancement of Defect Characterization With AC Magnetic Flux Leakage: Far-Side Defect Shape Estimation and Sensor Lift-Off Compensation

Phase-Extraction-Based MFL Testing for Subsurface Defect in Ferromagnetic Steel Plate

Analysis of Leakage in a Sustainable Water Pipeline Based on a Magnetic Flux Leakage Technique

Optimization of the Magnetic Circuit in the MFL Inspection System for Storage-Tank Floors

Nondestructive Testing for Shallow Defect of Ferromagnetic Objects Based on Magnetic Probe Structure

A Novel Defect Quantification Method Utilizing Multi-Sensor Magnetic Flux Leakage Signal Fusion

An Improved MFL Method Fusing Multi-Space Magnetic Field Information for The Surface Defect Inspecting

Overview of Defect Magnetic Flux Leakage Imaging Technology

Defects inspection system for tank floors based on virtual instrument technique

Internal and External Defects Discrimination of Pipelines Using Composite Magnetic Flux Leakage Detection

Inspection of Gas Pipelines Using Magnetic Flux Leakage Technology

Backside Defect Evaluation in Carbon Steel Plate Using a Hybridized Magnetic Flux Leakage and Eddy Current Technique

A Portable Magnetic Flux Leakage Testing System For Pielines Defect Inspection

Non-destructive damage detection for steel pipe scaffolds using MFL-based 3D defect visualization

The Design of a Mechanical Damage Inspection Tool Using Dual Field Magnetic Flux Leakage Technology

A Review of Magnetic Flux Leakage Nondestructive Testing