Abstract:This paper describes the design of a new magnetic flux leakage (MFL) inspection tool that performs an inline inspection to detect and characterize both metal loss and mechanical damage defects. An inspection tool that couples mechanical damage assessment as part of a routine corrosion inspection is expected to have considerably better prospects for application in the pipeline industry than a tool that complicates existing procedures. The design is based on study results that show it is feasible to detect and assess mechanical damage by applying a low magnetic field level in addition to the high magnetic field employed by most inspection tools. Nearly all commercially available MFL tools use high magnetic fields to detect and size metal loss such as corrosion. A lower field than is commonly applied for detecting metal loss is appropriate for detecting mechanical damage, such as the metallurgical changes caused by impacts from excavation equipment. The lower field is needed to counter the saturation effect of the high magnetic field, which masks and diminishes important components of the signal associated with mechanical damage. Finite element modeling was used in the design effort and the results have shown that a single magnetizer with three poles is the most effective design. Furthermore, it was found that for the three-pole system the high magnetization pole must be in the center, which was an unexpected result. The three-pole design has mechanical advantages, including a magnetic null in the backing bar, which enables installation of a pivot point for articulation of the tool through bends and restrictions. This design was prototyped and tested at Battelle’s Pipeline Simulation Facility (West Jefferson, OH). The signals were nearly identical to results acquired with a single magnetizer reconfigured between tests to attain the appropriate high and low field levels.

A Portable Magnetic Flux Leakage Testing System For Pielines Defect Inspection

Theory and Application of Magnetic Flux Leakage Pipeline Detection

Internal and External Defects Discrimination of Pipelines Using Composite Magnetic Flux Leakage Detection

High-Speed Inspection Method Fusing Pulsed Eddy Current and Magnetic Flux Leakage

A 3-D Pseudo Magnetic Flux Leakage (PMFL) Signal Processing Technique for Defect Imaging

Defect classification and quantification method based on AC magnetic flux leakage time domain signal characteristics

Inspection of Gas Pipelines Using Magnetic Flux Leakage Technology

Analysis of Leakage in a Sustainable Water Pipeline Based on a Magnetic Flux Leakage Technique

Study of MFL signal identification in pipelines based on non-uniform magnetic charge distribution patterns

Circumferential and Longitudinal Defect Detection Using Multiphysics Fusion Electromagnetic Sensing Probe

Development of a Portable High-Precision above Ground Marker System for an MFL Pipeline Inspector

Development of the 3 -D Magnetic Flux Leakage Measurement Platform

Overview of Defect Magnetic Flux Leakage Imaging Technology

A Portable Magnetic Flux Leakage Detector for Tank Floors

A Method for Identifying Inclined Defects by Using Magnetic Flux Leakage Spectral Envelope Detection

A Magnetic Flux Leakage Detector for Ferromagnetic Pipeline Welds with a Magnetization Direction Perpendicular to the Direction of Travel

A Method Using Magnetic Eddy Current Testing for Distinguishing ID and OD Defects of Pipelines under Saturation Magnetization

Numerical Simulation on Magnetic Flux Leakage Testing of the Steel Cable at Different Speed Title

The Design of a Mechanical Damage Inspection Tool Using Dual Field Magnetic Flux Leakage Technology

A Novel Defect Quantification Method Utilizing Multi-Sensor Magnetic Flux Leakage Signal Fusion