Abstract:Eugenol, an abundant, naturally occurring phenolic compound, was converted into a thermoplastic polycarbonate by olefin metathesis followed by interfacial polymerization with triphosghene. This resulted in polymers with Mn ranging from 5300 – 12700 g mol-1 and an average glass transition temperature (Tg) of 82 °C. The polycarbonates were depolymerized via ethenolysis reactions under modest ethylene pressures (150 – 240 psi) in the presence of [Ru]-metathesis catalysts to yield a discrete monomer [bis(4-allyl-2-methoxyphenol) carbonate, compound 2]. 2 was then polymerized with a second generation Grubbs catalyst (M204) to produce a recycled polymer with Mn = 7500 g mol-1 and a Tg of 114 °C. The 32 °C increase in Tg was due to the isomerization of the allyl group to internal positions, which then allowed for the formation of stilbene and 3-carbon unsaturated linkages between aromatic groups. To expand the ethenolysis recycling approach to cross-linked networks, eugenol was converted into a cyanate ester (3), which was then thermally cyclotrimerized to generate 2,4,6-tris(4-allyl-2-methoxyphenoxy)-1,3,5-triazine (4), a monomer with a triazine core and three pendent aromatic rings with methoxy and allyl substituents. 4 was cross-linked via olefin metathesis (M204 catalyst) to generate a network with Mn = 8600 g mol-1 and a Tg of 180 °C. Similar to the polycarbonate, the polycyanurate was efficiently depolymerized in the presence of ethylene to regenerate 4. Compound 4 was then polymerized and depolymerized two additional times, demonstrating full circularity for the triazine monomer/network. The recycled networks exhibited similar Tgs (167–184 °C) and thermal stability compared to the virgin polymer. Overall, this work demonstrates that both thermoplastic and cross-linked networks can be readily prepared from eugenol and catalytically recycled under standard ethenolysis conditions. Unlike many conventional approaches, the recycled polymers described in this work exhibited no significant degradation in thermomechanical properties. This type of approach supports a circular bioeconomy and may help to reduce plastic waste and the accumulation of micro/nanoplastic particles in the environment.

Green Synthesis of Thermoplastic Composites from a Terpenoid-Cellulose Ester

Green Synthesis of Cellulose Formate and Its Efficient Conversion into 5-Hydroxymethylfurfural

Efficient Conversion of Cellulose to Thermoplastics by Mechanochemical Esterification

[Ru]-Catalyzed Olefin Metathesis and Ethenolysis for the Synthesis and Recycling of Bio-Based Polycarbonates and Polycyanurates

Innovative Green Synthesis of Hydrophobic Covalent Networks Using Ethyl Cellulose/Thymol Eutectic Systems

Facile preparation of self-assembled high-performance cellulose based composite

Durable composites by vulcanization of oleyl-esterified lignin

Chemical Modification of Cellulose Using a Green Route by Reactive Extrusion with Citric and Succinic Acids

Selective Synthesis of Bioderived Dibenzofurans and Bicycloalkanes from a Cellulose-Based Route

A facile route for concurrent fabrication and surface selective functionalization of cellulose nanofibers by lactic acid mediated catalysis

Structure reorganization of cellulose hydrogel by green solvent exchange for potential plastic replacement

Effect of green co-solvents on properties and synthesis of cellulose esters in superbase ionic liquid

Production and Surface Modification of Cellulose Bioproducts

Plasticized Cellulosic Films by Partial Esterification and Welding in Low-Concentration Ionic Liquid Electrolyte

A facile strategy towards heterogeneous preparation of thermoplastic cellulose grafted polyurethane from amorphous regenerated cellulose paste

Beechwood carbohydrates for enzymatic synthesis of sustainable glycolipids

Extraction of cellulose from halophytic plants for the synthesis of a novel biocomposite

Green Biocatalytic Synthesis of (hydroxy)cinnamic Monoterpenyl Esters in Biomass Solvent: Mechanism Underlying Different Reaction Efficiency

Facile Preparation of Cellulose/Polylactide Composite Materials with Tunable Mechanical Properties

Insight into the Feasibility of Fatty Acyl Chlorides with 10-18 Carbons for the Ball-Milling Synthesis of Thermoplastic Cellulose Esters

Synthesis Of Biobased Diethyl Terephthalate Via Diels-Alder Addition Of Ethylene To 2,5-Furandicarboxylic Acid Diethyl Ester: An Alternative Route To 100% Biobased Poly(Ethylene Terephthalate)