Abstract:Poly(ethylene terephthalate-co-cyclohexanedimethanol terephthalate) (PETG) which could perform good mechanical and transparency properties have been commercialized for decades. While, such good properties presented only when the copolyesters is unable to crystallize for a narrow window of compositions. Moreover, considering the unsustainability of 1,4-cyclohexanedimethanol (CHDM) which was mainly obtained from fossil resources, incorporating novel biobased monomer into poly(ethylene terephthalate) (PET) to obtain the excellent properties have arisen researchers’ attentions. Novel biobased 2.5-tetrahydrofurandimethanol (THFDM), an alicyclic diol containing similar structure with CHDM, was successfully introduced into PET and obtained a series of copolyesters with outstanding tunable properties. The process was conducted in 5L stainless steel reactor, which maintained the stability of properties of samples and provided the prospect of being large scale production. The cyclic structure and ether group contained by THFDM reached a balance to the influence on the Tg of copolyesters, resulting only slight change of Tg (ranging from 76.1 °C to 69.4 °C). Three equations, namely Fox’s, Gordon–Taylor’s and Kwei’s equations, were employed to evaluate the Tg of copolyesters. According to the statistics analysis, the value calculated by Kwei’s equation performed the best fitting the experimental results comparing to the other two theories, due to the peculiar dielectric properties. The (co)polymers performed as amorphous materials with excellent transparency at room temperature. As expected, the introduction of highly electronegative ether-oxygen atoms increased the hydrophilicity. It was worthy noting that the rheology property determining the processability was significantly influenced by the polarity which could be adjusted by the content of THFDM. As for the mechanical property, the yield strength increased form 52.7 MPa (PET) to 63.6 MPa (poly(tetrahydrofurandimethanol terephthalate), PTT), while the elongation at break decreased from 205.0% (PET) to 43.3% (PTT) in consistent with the decrease tendency of impact strength (200.6–78.0 J/m). Overall, the PETTs copolyesters performed outstanding transparency, comparable Tg , broader processing window and better mechanical properties comparing with PETG, and it could be potentially used in sheet material, high-performance shrink film, bottle and profile markets. Therefore, the PETT copolyesters is an ideal candidate in replacing PETG to realize the concept of “carbon neutral” and “sustainable development”.

Synthesis Of Biobased Diethyl Terephthalate Via Diels-Alder Addition Of Ethylene To 2,5-Furandicarboxylic Acid Diethyl Ester: An Alternative Route To 100% Biobased Poly(Ethylene Terephthalate)

PEF Plastic Synthesized from Industrial Carbon Dioxide and Biowaste

Catalyst- and Solvent-Free Upcycling of Poly(Ethylene Terephthalate) Waste to Biodegradable Plastics

Kilogram-scale preparation of sustainable PETG modified with a biobased cyclic diol derived from 5-hydroxymethylfurfural: From synthesis to properties

Towards Sustainable Production of Polybutylene Adipate Terephthalate: Non-Biological Catalytic Syntheses of Biomass-Derived Constituents

Enzymatic synthesis of lignin derivable pyridine based polyesters for the substitution of petroleum derived plastics

Synthesis by Melt-Polymerization of a Novel Series of Bio-Based and Biodegradable Thiophene-Containing Copolyesters with Promising Gas Barrier and High Thermomechanical Properties

Biobased PET from lignin using an engineered cis, cis-muconate-producing Pseudomonas putida strain with superior robustness, energy and redox properties

Partially bio-based copolyesters poly(ethylene 2,5-thiophenedicarboxylate-co-ethylene terephthalate): Synthesis and properties

Biobased Terephthalic Acid Technologies: A Literature Review

Enhanced Methanolysis of Waste PET for Sustainable Production of Dimethyl Terephthalate and Cyclic Arylboronic Esters

Converting Waste PET into Dimethyl Terephthalate and Diverse Boronic Esters under Metal-free Conditions

Full Valorisation of Waste PET into Dimethyl Terephthalate and Cyclic Arylboronic Esters

Recycling of Polyesters by Organocatalyzed Methanolysis Depolymerization: Environmental Sustainability Evaluated by Life Cycle Assessment

Biological Valorization of Poly(ethylene terephthalate) Monomers for Upcycling Waste PET

Integrating experimental and computational approaches for deep eutectic solvent-catalyzed glycolysis of post-consumer polyethylene terephthalate

Clean Enzymatic depolymerization of highly crystalline polyethylene terephthalate in moist-solid reaction mixtures

Selective depolymerization of PET to monomers from its waste blends and composites at ambient temperature

Towards carbon neutrality: Sustainable recycling and upcycling strategies and mechanisms for polyethylene terephthalate via biotic/abiotic pathways

Towards a better understanding of the cosolvent effect on the low-temperature glycolysis of Polyethylene Terephthalate (PET)

Hydrolysis of waste polyethylene terephthalate catalyzed by easily recyclable terephthalic acid