Abstract:Sand erosion has been identified as a potential damage and failure mechanism in pipelines/elbows employed to transport gas from wells to terminals. Erosion can cause localized material loss decreasing the structural integrity of pipelines/elbows leading to failure. As a result, sand erosion has been the object of much research work in the oil and gas industry. The prediction of erosion caused by sand transported by hydrocarbons flow is a difficult task due to the large number of variables involved. At present, a great number of empirical models have been developed to predict sand erosion in smaller diameter pipelines under laboratory conditions. Therefore, such formulations generally present uncertainties for their application in larger diameter pipelines employed to transport oil and gas because there is no fundamental basis showing how the empirical formulations can be extrapolated to large diameters pipelines as most of the models have been developed on the basis of elementary laboratory experiments, which may not represent the real sand erosion conditions. Furthermore, most of the analytical/empirical models were developed for specific pipeline/elbows diameters and cannot be employed to predict erosion in different engineering structures. Hence, in the present work a computational fluid dynamic modeling strategy is proposed, which incorporated fundamental physically erosion parameters to predict erosion in larger diameter pipelines/elbows. The methodology was applied to different elbows/pipelines diameters in order to investigate how pipeline's diameter, sand production rate, and sand particles sizes affect the erosion mechanism and the erosion rate. The results showed the importance of including fluid and flow conditions, sand particles trajectory, and self-particles movement. The computational fluid dynaimcs results were compared with those obtained with the most employed empirical models to predict sand erosion in the oil and gas industry models published in the literature, and it was shown that the proposed modeling strategy can be used to predict erosion in larger diameters pipelines/elbows with good results.

Simultaneous Optimal Estimation of Roughness and Minor Loss Coefficients in a Pipeline

Efficient Numerical Approach for Simultaneous Calibration of Pipe Roughness Coefficients and Nodal Demands for Water Distribution Systems

Pressure-balanced Saint–Venant Equations for Improved Asymptotic Modelling of Pipe Flow

Optimization and Extended Applicability of Simplified Slug Flow Model for Liquid-Gas Flow in Horizontal and Near Horizontal Pipes

Combined APSO-ANN and APSO-ANFIS models for prediction of pressure loss in air-water two-phase slug flow in a horizontal pipeline

Estimation of Deposit Thickness in Single-Phase Liquid Flow Pipeline using Finite Volume Modelling

A Refined Analytical Model for Landslide or Debris Flow Impact on Pipelines – Part II: Embedded Pipelines

Pipe Roughness Identification of Water Distribution Networks: The Full Turbulent Case

State and Parameter Estimation for Natural Gas Pipeline Networks using Transient State Data

An algorithm combining sedimentation experiments for pipe erosion investigation

Predicting erosion in wet gas pipelines/elbows by mathematical formulations and computational fluid dynamics modeling

Advanced iterative procedures for solving the implicit Colebrook equation for fluid flow friction

APPLICATION OF DIFFERENT TURBULENT MODELS IN CALCULATION OF FLOW RESISTANCE IN PIPELINES AND COMPARISON THEREOF

Explicit pipe friction factor equations: evaluation, classification, and proposal

Predicting pressure loss of turbulent non-Newtonian fluids in annuli under temperature and pipe rotation effects using optimization algorithms

A multi-state description of roughness effects in turbulent pipe flow

An Asymptotic-Preserving Scheme for Isentropic Flow in Pipe Networks

Multiphase friction calculation peculiarities based on models implemented in the "d-Flow" software package

An inexact Petrov-Galerkin approximation for gas transport in pipeline networks

Network Flow based approaches for the Pipelines Routing Problem in Naval Design

Experiments and modeling of fluctuating frictional force of pipeline inspection gauges