Abstract:Cement solidification is essential to reduce heavy metal leaching from industrial sludge and make it recyclable. This paper studied the effect of aggregate grading optimized by sludge containing heavy metal of different particle sizes on the performance of baking-free sludge bricks, which was mixed with industrial sludge cured by both micro-silica fume and cement. First, the gradation of fine natural aggregates was adjusted according to the Fuller curve. Fine aggregates in baking-free bricks were replaced by artificially processed sludge with particle sizes of 0.15 mm ~0.3 mm and 2.36 mm ~4.75 mm. In this case, a mixed proportion scheme was designed. Then, the strength, water absorption, porosity, and heavy metal leaching were measured. With the help of nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM), the phase and pore structures were observed. The test results showed that: (1) Sludge can replace part of the fine aggregates to make baking-free bricks, resulting in the reduction of the strength of baking-free bricks, but the strength still meets the standard strength requirements of GB/T 21,144-2007. (2) When fine aggregates are partly replaced by sludge with finer particle sizes, baking-free sludge bricks exhibit higher strength, lower water absorption, better pore structures and microphase structure, and stronger solidification of heavy metals, the leaching number of heavy metals meets the standard requirements of GB5085.3-2007, which will be provided support for actual industrial production.Implications: Cement solidification is an essential means to reduce the heavy metal leaching from industrial sludge and make it recyclable. This paper studied sludge containing heavy metal of different particle sizes on the performance of baking-free sludge bricks. This paper analyzed the compressive strength, porosity and water absorption of baking-free bricks mixed with sludge of different partical sizes, and adopted the NMR to characterize the pores of baking-free bricks, and the SEM to observe the baking-free bricks resultants and the interfacial transition zone (ITZ). The heavy metal leaching test verified the environmental benefits of baking-free bricks mixed with sludge instead of aggregates. There not only make full use of solid wastes, but also thus minimizing pollution to the environment, which provide support for actual industrial production and a reference for studying industrial sludge recycling technology.

Preparation and characterization of majority solid waste based eco-unburned permeable bricks

Microstructure Evolution and Improved Permeability of Ceramic Waste-Based Bricks

Utilization of industrial wastes in non-sintered bricks: microstructure and environmental impacts

Preparation, characteristics and mechanisms of the composite sintered bricks produced from shale, sewage sludge, coal gangue powder and iron ore tailings

Analysis on Compressive and Flexural Strength of Unburned Brick with Electrolytic Manganese Slag

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Utilization of river sediment, sewage sludge and wheat straw as the primary raw material in sintered-shale bricks

Pervious Concrete with Secondarily Recycled Low-Quality Brick-Concrete Demolition Residue: Engineering Performances, Multi-Scale/phase Structure and Sustainability

Recycling of sewage sludge in clay-free thermal insulation brick: assessment of microstructure, performance, and environment impact

Preparation and performance of steel slag and recycled brick aggregate modified concrete under the background of solid waste application

Study on preparation of brick blocks by using construction waste and sludge

Lightweight bricks manufactured from ground soil, textile sludge, and coal ash

Solidification and stabilization of Pb-Zn mine tailing with municipal solid waste incineration fly ash and ground granulated blast-furnace slag for unfired brick fabrication

Utilization of Drinking Water Treatment Sludge with Coal Fly Ash to Make Permeable Bricks for Low Impact Development

A Sustainable Reuse of Agro-Industrial Wastes into Green Cement Bricks

Utilization of Sandy Soil as the Primary Raw Material in Production of Unfired Bricks

Recovering Untreated Phosphorus Tailings and Coal Gangue to Prepare Ceramic Lightweight Bricks

Preparation and characterization of permeable bricks from gangue and tailings

Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash

Preparation of Ecology Water Penetrable Brick Using Siliconmanganese Slag

Effect of industrial sludge particle size on the performance of baking-free sludge bricks