Abstract:The mismanaged and abandoned mine tailings are an important source of heavy metal pollution in the mining regions, and there is a significant need to develop technically, environmentally, and economically feasible and sustainable solutions to manage them. This study explored the solidification and stabilization of the tailing from an abandoned Pb-Zn mine using municipal solid waste incineration fly ash (MSWIFA) blended with ground granulated blast-furnace slag (GGBFS) for fabricating unfired bricks, and systematically characterized the products' mechanical and environmental performance. Various hydration products, such as ettringite, portlandite, and hydrotalcite, were formed in the unfired bricks in the solidification and stabilization process, which enhance the physical strength of unfired bricks and help immobilize the heavy metals. Slaking treatment of MSWIFA significantly increased the mechanical strength, reduced the water absorption, and improved the durability of unfired bricks, with the product prepared from MSWIFA with 7-day slaking exhibiting the highest unconfined compressive strength (12.3 MPa) after 56 days of curing. The concentrations of As (0.35-1.49 μg/L), Cd (0.35-0.70 μg/L), Cr (1.38-9.40 μg/L), Cu (2.28-5.87 μg/L), Ni (0.16-2.24 μg/L), Pb (0.16-59.80 μg/L), and Zn (1.60-10.80 μg/L) in the leachates of unfired bricks were below the relevant regulatory limits for surface water and groundwater. Converting the mine tailing (with MSWIFA and GGBFS) to different types of unfired bricks could yield economic payback in the range of 283.7-306.5 Yuan per ton. Replacing cement with MSWIFA blended with GGBFS in the solidification and stabilization treatment could save about 0.15 ton of cement per ton of mine tailing disposed, which avoids significant energy use and carbon dioxide emissions. These findings demonstrate that utilization of mine tailings and industrial wastes to fabricate unfired bricks is a promising way of reusing such wastes and controlling the associated pollution, which also brings significant economic benefit and improves environmental sustainability.

Utilization of Drinking Water Treatment Sludge with Coal Fly Ash to Make Permeable Bricks for Low Impact Development

Production of Water-Permeable Ceramic Bricks Derived from Fly Ash Via a Simple Pellet Method: Mechanism of Mechanical Strength and Permeability

Raw Material Design, Sintering Temperature Optimization and Development Mechanism Investigation of Self-Foaming Porous Bricks with High Solid Waste Addition

Mechanical and Microstructural Analysis of Lightweight Subgrade Bricks Synthesized from Mixtures of Coal Fly Ash and Sewage Sludge

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Solidification and stabilization of Pb-Zn mine tailing with municipal solid waste incineration fly ash and ground granulated blast-furnace slag for unfired brick fabrication

Total Recycling of Low-Quality Urban-Fringe Construction and Demolition Waste Towards the Development of Sustainable Cement-Free Pervious Concrete: the Proof of Concept

Lightweight bricks manufactured from ground soil, textile sludge, and coal ash

Synergistic Effects of Amorphous Porous Materials and Anhydrous Na2CO3 on the Performance of Bricks with High Municipal Sewage Sludge Content

Use of Steel Slag and Quartz Sand‐tailing for the Preparation of an Eco‐friendly Permeable Brick

Recycling of Heavy Metal Contaminated River Sludge into Unfired Green Bricks: Strength, Water Resistance, and Heavy Metals Leaching Behavior – A Laboratory Simulation Study

Environmental Performance of Unfired Bricks Produced from Co-Disposal of Mine Tailings and Municipal Solid Waste Incineration Fly Ash Based on Comprehensive Leaching Tests

Microstructure and Strength of Alkali-Activated Bricks Containing Municipal Solid Waste Incineration (MSWI) Fly Ash Developed As Construction Materials

Preparation And Performance Of Ecological Water-Permeable Bricks Using Desulfurization Slags Of Fluidized Bed Coal Combustion

Recycling of Waste River Sludge into Unfired Green Bricks Stabilized by a Combination of Phosphogypsum, Slag, and Cement

Comprehensive Performance Study of Aluminum Ash and Calcium Carbide Slag for Brick Making under Ultra-High Pressure

Study on Preparation of Light-Weight Porous Brick with High Content of Urban Sewage Sludge

Comprehensive Utilization of Blast Furnace Slag, Municipal Sludge and Kaolin Clay in Building Brick Manufacture: Crystalline Transformation, Morphology Observation and Property Assessment

Using Fly Ash to Utilize Dry Sludge of Water Treatment in Civil Engineering Materials

Recycling of MSWI fly ash in clay bricks-effect of washing and electrodialytic treatment

Utilization of MSWI Fly Ash in Making Ceramic Brick and Product Characterization