Abstract:In the present study aluminium metal matrix composites (Al - MMCs) reinforced with different Wt% (2,3,4,5 and 6) of Silicon carbide (SiC) and hybrid composites of aluminium matrix reinforced with different Wt% (2,3,4,5 and 6) of SiC and constantly adding Boron carbide (B 4 C) with 2 wt% were fabricated using a cost effective powder metallurgy (PM) method and the mechanical alloying process. Mechanical properties like micro structure, phase analysis, hardness, compression strength, density, porosity and wear were characterized and investigated for the aluminium matrix composite (AMC) samples. Microstructural characterization of sintered samples was performed using a Scanning electron microscope with energy dispersive X-ray analysis. XRD analysis confirmed the peak identification of Aluminium, SiC and B 4 C particulates in the (Al-MMCs) composites. The hardness values of the composites Al+6wt% SiC and Al+4wt%SiC+2wt%B 4 C were seen as 20.6% higher than those of pure aluminium matrix. Increase in the hardness of the composite was seen due to grain refinement and resistance to dislocation motion. The existence of SiC particles in Al matrix was seen having the ability to improve the hardness value of the composites. The addition of SiC and B 4 C reinforcements in the Al matrix alloy has the potential to greatly increase the compressive strength of the AMCs. The density of hybrid composites was seen having a major impact on the influence of SiC and B 4 C particulates. The wear resistance of the hybrid composites were examined under load range of 5 and 10 N, with sliding speed of 0.1 m/s. The synergistic effect of reinforcing particles was seen as assisting the improvement of wear resistance due to the relative concentration of SiC and B 4 C. The incorporation of SiC and B 4 C reinforcements into the Aluminium matrix hybrid composite can substantially increase the hardness, compressive strength, and wear resistance of the composites.

Evaluation of Mechanical and Wear Properties of Al 5059/B4C/Al2O3 Hybrid Metal Matrix Composites

Evaluation of Mechanical Properties of Aluminum-Silicon Carbide Metal Matrix Composite

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Development and wear behavior investigation on aluminum-7075/B4C/fly ash metal matrix composites

Mechanical Characteristics and Wear Behaviour of Al/SiC and Al/SiC/B4C Hybrid Metal Matrix Composites Fabricated Through Powder Metallurgy Route

Mechanical and wear analysis of AA6061-T6-SiC-TiC-graphite metal matrix composite

Evaluation of Mechanical Properties of Ceramic Reinforced Aluminium-7029 Hybrid Composite

Investigation on the effect of SiC and TiB2 ceramic particles on mechanical and tribological properties of Al7075 hybrid metal matrix composites prepared through conventional stir casting technique

Investigate the mechanical properties of Aluminium Metal Matrix Composite

A Systematic Review on the Mechanical, Tribological, and Corrosion Properties of Al 7075 Metal Matrix Composites Fabricated through Stir Casting Process

Enhancement in mechanical properties of ceramic reinforced aluminum MMC via stir casting methodology: A review

Performance analysis and mechanical behavior of aluminum metal matrix composite

Evaluation of mechanical and thermal properties of Al 7475–CSA–graphite hybrid metal matrix composites

Investigation of Mechanical and Tribological Properties of Al6061–TiB2 Metal Matrix Composites

Characterization on properties of Al7050/TiC/BN hybrid metal matrix composite

Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite

Microstructural Characterization, Mechanical And Wear Behaviour Of Al2024-B4C Composites For Aerospace Applications

Processing and Evaluation of Mechanical Properties and Dry Sliding Wear Behavior of AA6061-B4C Composites

Abrasive Wear Behaviour of Sand Cast B4C Particulate Reinforced AA5052 Metal Matrix Composite

Investigation on Mechanical Behavior of Al6061- Coconut Shell Ash- Granite Dust Reinforced Hybrid Metal Matrix Composites Manufactured using Stir Casting Technique

Enhanced mechanical and tribological properties of ultrasonically assisted stir-cast AA7075 metal matrix composites in challenging corrosive environments