Abstract:Traditional methods for surface pretreatment of carbon fibers often rely on the use of precious metals like palladium and silver as activators to enhance surface reactivity through redox reactions, achieving metallization. However, such approaches are costly and economically inefficient. This study employed a cost-effective copper (Cu) – nickel (Ni) colloid mixture as an activator and investigated its effectiveness in enhancing surface reactivity. Meanwhile, it examined the influence of various parameters, such as pH value, reducing agent (formaldehyde (HCHO) concentration, temperature, and deposition duration, on the morphology and structure of copper-electrodeposited carbon fibers. To characterize the treated samples, scanning electron microscope (SEM) and X-ray photoelectron spectrometer (XPS) were adopted, shedding light on the mechanism underlying copper electrodeposition on the carbon fiber surface. The results indicate that Cu-Ni colloid mixture activation exhibits significant improvements. The optimal conditions for uniform and smooth copper electrodeposition on the carbon fiber surface identified as follows: a pH value of 13.5, a HCHO concentration of 15 mL/L, a temperature of 50°C, and a deposition duration of 5 min. Consequently, these results represent a cost-effective alternative to traditional precious metal-based activation methods, with promising applications in surface pretreatment for carbon fibers.

Preparation of Copper-coated Mesophase Pitch-based Carbon Fibers by Electroless Plating Technique with the APTES Grafting Modification

Electroless copper plating mechanism of mesophase pitch-based carbon fibers by the grafting modification of silane couple agents

Influence of carbon fibers on interfacial bonding properties of copper-coated carbon fibers

Electroless plating of copper on carbon fiber surfaces and corresponding mechanism

Growth mechanism and thermal behavior of electroless Cu plating on short carbon fibers

Fabrication of high-performance carbon nanotube/copper composite fibers by interface thiol-modification

New Preparation Technology of Copper Matrix Composites Reinforced by Short Carbon Fibers

An efficient method to functionalize soybean protein fiber for fuse wire application

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

Fabrication of Copper/modal Fabric Composites Through Electroless Plating Process for Electromagnetic Interference Shielding

Functionalized carbon fibers with MXene via electrochemistry aryl diazonium salt reaction to improve the interfacial properties of carbon fiber/epoxy composites

Fabrication and Properties of Short Carbon Fibers Reinforced Copper Matrix Composites

Microstructure and properties of copper plating on citric acid modified cotton fabric

In Situ Study of Copper Electrodeposition on A Single Carbon Fiber

Highly Conductive Para-Aramid Fabric Prepared Via Bioinspired Poly(dopamine) Functionalization After an Improved Etching Process

Study on new process of electroless copper plating pretreatment on carbon fiber surface

Fabrication of Light‐Weight and Highly Conductive Copper–Carbon Nanotube Core–Shell Fibers Through Interface Design

Surface coarsening of carbon fiber/cyanate ester composite for adhesion improvement of electroless copper plating as conductive patterns

Passivation coating on electrospun copper nanofibers for stable transparent electrodes.

The effect of electrophoretic deposition p‐aminobenzenesulfonamide grafted CNT on mechanical properties of carbon fiber filled polyamide 6 composite

Constructing the Bridge from Isotropic to Anisotropic Pitches for Preparing Pitch-Based Carbon Fibers with Tunable Structures and Properties