Abstract:The application prospects of carbon/carbon composites are greatly limited by interfacial cracks and pores caused by binder pitch displacement and cracking during high-temperature carbonization. In this study, silane coupling agent was coated on the surface of oxygen plasma-treated carbon fibers (CFs) and subsequently electrostatically self-assembled with sulfonated graphene (SG) to improve the interfacial bonding between filler and CTP. The results indicate that the tensile strength of carbon fiber treated with silane coupling agent increased by 19 % compared to untreated CF. This increase in strength may be related to the layer of silane coupling agent that repaired the grooves and imperfections on the CF surface. The addition of SG not only improves the distribution characteristics of the fibers, allowing the silane-treated CF to play a greater role in the matrix, but also creates a three-dimensional hydrogen-bonded cross-linking between the SG and the coal tar pitch (CTP) on the surface of the fibers. This inhibits CTP displacement and pyrolysis, achieving a tight bonding of the fiber to the matrix. The composites' structural integrity and mechanical properties were significantly improved due to the synergistic effect of silane-treated CF and SG. The compressive strength was 216.98 MPa, with a flexural strength of 54.78 MPa, 250 % higher than the untreated carbon fiber-reinforced composites. Additionally, the porosity decreased by 31.5 %, and the antioxidant properties increased. The study presents a potential solution to improve the performance of carbon/carbon composites by using the silane-treated CF-SG multiscale reinforced phase.

Electroless copper plating mechanism of mesophase pitch-based carbon fibers by the grafting modification of silane couple agents

Preparation of Copper-coated Mesophase Pitch-based Carbon Fibers by Electroless Plating Technique with the APTES Grafting Modification

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Electroless plating of copper on carbon fiber surfaces and corresponding mechanism

Molecular structure effects of mesophase pitch and isotropic pitch on morphology and properties of carbon nanofibers by electrospinning

Growth mechanism and thermal behavior of electroless Cu plating on short carbon fibers

Influence of carbon fibers on interfacial bonding properties of copper-coated carbon fibers

In Situ Study of Copper Electrodeposition on A Single Carbon Fiber

Fabrication and Properties of Short Carbon Fibers Reinforced Copper Matrix Composites

Functionalized carbon fibers with MXene via electrochemistry aryl diazonium salt reaction to improve the interfacial properties of carbon fiber/epoxy composites

Surface coarsening of carbon fiber/cyanate ester composite for adhesion improvement of electroless copper plating as conductive patterns

Multiscale enhancement of carbon/carbon composite performance by self-assembly of sulfonated graphene with silane-treated carbon fibers

Study on new process of electroless copper plating pretreatment on carbon fiber surface

Effects of the molecular structure from pitch fractions on the properties of pitch‐based electrospun nanofibers

Fabrication of Copper/modal Fabric Composites Through Electroless Plating Process for Electromagnetic Interference Shielding

An efficient method to functionalize soybean protein fiber for fuse wire application

A facile fabrication of Ag/SiC composite coating with high mechanical properties and corrosion resistance by electroless plating

Preparation of CNTs/SCF reinforcement using multiple continuous surface treatments to achieve synergistic improvement of epoxy resin-based composites interfacial properties: Towards industrial production of carbon fiber surface treatment

Single Carbon Fibers with a Macroscopic-Thickness, 3D Highly Porous Carbon Nanotube Coating

Synthesis of multi-branched porous carbon nanofibers and their application in electrochemical double-layer capacitors