Abstract:In recent years, Rotary Detonation Engine (RDE) has attracted more and more attention because of their higher combustion efficiency than conventional aerospace engines. For the key problems, ignition technique is particularly important. In order to establish a steady rotating detonation wave under one single ignition in a combustion chamber, a method based on controlling initial fuel distribution is proposed to start a rotating detonation engine under 0.4 MPa injection total pressure using hydrogen/air mixture as its propellant. Two-dimensional reactive Navier-Stokes equation coupled with the Arrhenius kinetic model and κ-ε model are used to simulate detonation process. Elementary chemical reaction model with 9 species 27 reversible reactions is applied to describe the evolution of reaction components. The finite volume method is conducted, and flux terms are solved by using the monotonic upstream-centered scheme for conservation laws, and the time integration is performed by using Euler method. Grid numbers are 600 (azimuthal direction) ×200 (axial direction), with mesh size of about 0.5 mm. Initial fuel filling rate (ϕ) is used to quantify the initial fuel distribution. The numerical study on the propagation characteristics of rotating detonation wave shows that the initial fuel filling rate is the key to the establishment of rotary detonation wave. This effect is particularly evident when the fuel injection pressure is low, which determines the height of the fuel layer(hf) for the first cycle of detonation wave development. When RDE operating steadily, hf is a function of the mixture sensitivity to detonation. But in initial stage, hf is affected by the fuel distribution and this affection can last more than one period. Once detonation wave or deflagration wave formed, it can either maintain rotating or die down, which is determined by the height of mixture layer ahead of it. Thus, keeping hf in an appropriate range by adjusting the initial fuel filling rate is the key to establish and maintain a rotating detonation wave in initial stage. Also, in this stage DW faces maximum possibility of extinguish. Based on this strategy, a rotating detonation wave is established successfully in combustion chamber with diameter of 95.5 mm and the length of chamber is 100 mm. The computed results give the rotating detonation wave has a velocity of 1 604 m/s and operational frequency is 5347.6 Hz. Furthermore, there are four operation modes of the engine due to different initial fuel filling rate, which are failed initiation of the detonation (0%−13.3%), stable rotating detonation (13.3%−20%), unstable detonation (20%−26.6%) and dying detonation (26.7%−100%). So the critical range of the initial fuel filling rate for steady rotating detonation is obtained. Moreover, the initial fuel distribution also influences the delay time of fuel deflagration to detonation transition.

Rotating Detonation Rocket Engine Operability Under Varied Pressure Drop Injection

Experimental validation of rotating detonation for rocket propulsion

Injection Studies on a Small-Scale Rotating Detonation Engine

Shock Propagation Through a Square Injector: Investigation into Rotating-Detonation Engine Injector Dynamics

Characteristic timescales for detonation-based rocket propulsion systems

Analysis on Propulsive Performance of Hollow Rotating Detonation Engine with Laval Nozzle

Experimental Study on Upstream Pressure Characteristics of Rotating Detonation Engine with Methane and Oxygen-Enriched Air

Nonidealities in Rotating Detonation Engines

Characterization of wave modes in a kerosene-fueled rotating detonation combustor with varied injection area ratios

Numerical Analysis of Combustion Dynamics in a Full-Scale Rotating Detonation Rocket Engine using Large Eddy Simulations

Experimental Research on Ignition and the Stabilization Process in Rotating Detonation Chamber

Experimental Study on Suppressing Pressure Feedback and Combustion Product Backflow of the Rotating Detonation Engine

Rotating Detonation Engine Injection Velocity Limit And Nozzle Effects On Its Propulsion Performance

Experimental Investigation on H 2 / O 2 Continuously Rotating Detonation Engine

Method based on controlling initial fuel distribution to establish stable rotating detonation wave in combustion chamber

Experimental investigation on the performance of the variable cross section rotating detonation engine

Numerical Investigation of Rotating Detonation Engine Propulsive Performance

Low mass-flow operation of small-scale rotating detonation engine

One Inducing Factor of the Operational Mode Transition in A Rotating Detonation Engine

An Investigation on the Wave Multiplicity and Control of Operating Modes in the Hydrogen-Fueled Rotating Detonation Engine

Experimental Investigations on Detonability Limits of Pulse Detonation Rocket Engine