Abstract:We have measured the elastic properties of live cells by Atomic Force Microscope (AFM) using different tip geometries commonly used in AFM studies. Soft 4-sided pyramidal probes (spring constant = 12 and 30 mN/m, radius 20 nm), 3-sided pyramidal probes (spring constant = 100 mN/m, radius 65-75 nm), flat (circular) probes (spring constant = 63 mN/m, radius 290 nm) and spherical probes (spring constant = 43 mN/m, radius 5 μm) have been used. Cells (3T3 fibroblasts) having elastic moduli around 0.5 kPa were investigated. We found that cell measured stiffness shows a systematic dependence on tip geometry: the sharper the tip, the higher the average modulus values. We hypothesize that the blunter the tip, the larger the contact area over which the mechanical response is measured or averaged. If there are small-scale stiffer areas (like actin bundles) they will be easier to pick up by a sharp probe. This effect can be seen in the wider distribution of the histograms of the measured elastic moduli on cells. Furthermore, non-linear responses of cells may be present due to the high average pressures applied by sharp probes, which would lead to an overestimation of the Young's modulus. Pressure versus contact radius simulations for the different tip geometries for a 0.5 kPa sample suggested similar average pressure for Bio-MLCTs, PFQNM and cut tips, except spherical tips that showed much lower average pressure at the same 400 nm indentation. However, real data of the cells suggested different results. Using the same indentation depth (400 nm), PFQNM and Bio-MLCTs showed similar average pressure and it decreased for cut and spherical tips. The calculated contact area at 400 nm cell indentation, using the obtained apparent Young's modulus for each tip geometry, showed the following distribution: Bio-MLCTs < PFQNM < cut << spherical. In summary, tip geometry as well as average pressure and tip-sample contact area are important parameters to take into account when measuring mechanical properties of soft samples. The larger the tip radius, the larger the contact area that will lead to a more evenly distribution of the applied pressure.

The effect of finite sample thickness in scanning ion conductance microscopy stiffness measurements

Ex vivo SIM-AFM measurements reveal the spatial correlation of stiffness and molecular distributions in 3D living tissue

An Investigation of How Specimen Dimensions Affect Biaxial Mechanical Characterizations with Cellscale BioTester and Constitutive Modeling of Porcine Tricuspid Valve Leaflets

Side-view optical microscopy-assisted atomic force microscopy for thickness-dependent nanobiomechanics

Low Stress Ion Conductance Microscopy of Sub-Cellular Stiffness

Measuring biomaterials mechanics with atomic force microscopy. 1. Influence of the loading rate and applied force (pyramidal tips)

Scanning Ion Conductance Microscopy for Studying Biological Samples

Single cell mechanics analyzed by atomic force microscopy and finite element simulation

Cell Visco-Elasticity Measured with Afm and Vertical Optical Trapping at Sub-Micrometer Deformations

Longitudinal shear wave elasticity measurements of millimeter-sized biomaterials using a single-element transducer platform

Effect of F-actin and Microtubules on Cellular Mechanical Behavior Studied Using Atomic Force Microscope and an Image Recognition-Based Cytoskeleton Quantification Approach

Critical review of single-cell mechanotyping approaches for biomedical applications

Spectroscopic Investigation of Local Mechanical Impedance of Living Cells

A Simple Fabricated Thickness-Based Stiffness Gradient for Cell Studies.

A novel approach for extracting viscoelastic parameters of living cells through combination of inverse finite element simulation and Atomic Force Microscopy

Standardized Nanomechanical Atomic Force Microscopy Procedure (SNAP) for Measuring Soft and Biological Samples

Physical limits to biomechanical sensing

Probing Micromechanical Properties of the Extracellular Matrix of Soft Tissues by Atomic Force Microscopy

Influence of cantilever tip geometry and contact model on AFM elasticity measurement of cells

Cell Visco-Elasticity Measured with Afm and Optical Trapping at Sub-Micrometer Deformations

Relationship between cell stiffness and stress fiber amount, assessed by simultaneous atomic force microscopy and live-cell fluorescence imaging