Abstract:Dynamic mechanical behaviour of living cells has been described by viscoelasticity. However, quantitation of the viscoelastic parameters for living cells is far from sophisticated. In this paper, combining inverse finite element (FE) simulation with Atomic Force Microscope characterization, we attempt to develop a new method to evaluate and acquire trustworthy viscoelastic index of living cells. First, influence of the experiment parameters on stress relaxation process is assessed using FE simulation. As suggested by the simulations, cell height has negligible impact on shape of the force-time curve, i.e. the characteristic relaxation time; and the effect originates from substrate can be totally eliminated when stiff substrate (Young's modulus larger than 3 GPa) is used. Then, so as to develop an effective optimization strategy for the inverse FE simulation, the parameters sensitivity evaluation is performed for Young's modulus, Poisson's ratio, and characteristic relaxation time. With the experiment data obtained through typical stress relaxation measurement, viscoelastic parameters are extracted through the inverse FE simulation by comparing the simulation results and experimental measurements. Finally, reliability of the acquired mechanical parameters is verified with different load experiments performed on the same cell.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: **How to accurately extract the viscoelastic parameters of living cells**. Specifically, the author aims to develop a new method to evaluate and obtain reliable viscoelastic indices of living cells by combining inverse finite - element simulation and Atomic Force Microscopy (AFM) technology. ### Problem Background 1. **Limitations of Existing Methods** - **The Hertz model assumes linear elasticity**: This model cannot explain the common dynamic behaviors in living cells. - **The estimated Young's modulus has a large dispersion**: Leading to doubts about the credibility of the data. - **The stiffness values of different cells overlap severely**: Making it difficult to distinguish different cells based on stiffness. 2. **Characteristics of Viscoelastic Materials** - For viscoelastic materials, stress depends not only on strain but also on time (\(\sigma = f(\varepsilon, t)\)). - Biomaterials usually exhibit dynamic mechanical behaviors, such as hysteresis and loading - speed - dependent stress. ### Solution To overcome the above problems, the author proposes a new method, that is, by combining inverse finite - element simulation and AFM technology to extract the viscoelastic parameters of living cells. The specific steps are as follows: 1. **Evaluation of the Influence of Experimental Parameters on the Relaxation Process** - Use finite - element simulation to evaluate the influence of experimental parameters (such as cell height, substrate stiffness, etc.) on the force - time curve. - The results show that when a sufficiently rigid substrate (Young's modulus greater than 3 GPa) is used, the substrate effect can be completely eliminated; the cell height has a relatively small influence on the shape of the force - time curve. 2. **Parameter Sensitivity Analysis** - Conduct sensitivity analysis on Young's modulus, Poisson's ratio and characteristic relaxation time to design an effective optimization strategy. - It is found that Young's modulus mainly affects the magnitude of force, Poisson's ratio affects both the magnitude and shape of force, and the characteristic relaxation time only affects the shape of the force - time curve. 3. **Inverse Finite - Element Simulation** - By comparing the simulation results with experimental measurements, adjust parameters (such as Young's modulus and characteristic relaxation time), and finally extract the viscoelastic parameters. - Use the corrected viscoelastic parameters to conduct multiple experimental verifications to ensure their reliability. ### Conclusion Through this method, the author has successfully extracted the viscoelastic parameters of living cells from experimental data and verified the reliability of these parameters. This method provides a more accurate tool for studying the dynamic mechanical behaviors of cells, which is helpful for in - depth understanding of the physiological state of cells and their changes in diseases. ### Formula Summary - Stress - strain relationship of viscoelastic materials: \(\sigma = f(\varepsilon, t)\) - Stress expression of the first - order viscoelastic model: \(\sigma(t)=E_0\varepsilon + C\exp\left(-\frac{E_1}{\tau_1}t\right)\) - Stress expression of the n - order viscoelastic model: \(\sigma(t)=G_0E_0+\sum_{i = 1}^{n}G_i\exp\left(-\frac{t}{\tau_i}\right)\) where \(G_i\) and \(\tau_i\) are the so - called Prony series.

A novel approach for extracting viscoelastic parameters of living cells through combination of inverse finite element simulation and Atomic Force Microscopy

Single cell mechanics analyzed by atomic force microscopy and finite element simulation

Measuring the viscoelastic relaxation function of cells with a time-dependent interpretation of the Hertz-Sneddon indentation model

Cell Visco-Elasticity Measured with Afm and Vertical Optical Trapping at Sub-Micrometer Deformations

An updated model including the deflection history of microcantilever for characterizing cellular viscoelastic properties by AFM indentation-relaxation test

A noninvasive approach to determine viscoelastic properties of an individual adherent cell under fluid flow

Simultaneous Measurement of Multiple Mechanical Properties of Single Cells Using AFM by Indentation and Vibration

AFM-based Indentation Method for Measuring the Relaxation Property of Living Cells.

Double-peak resonant mapping of cellular viscoelasticity in force-clamp detection of atomic force microscope

Combined Finite Element (FE) Modeling and Fluid Shear Experiment to Determine the Viscoelastic Material Properties of Osteocytes

Cell Visco-Elasticity Measured with Afm and Optical Trapping at Sub-Micrometer Deformations

Beyond stiffness: Multiscale viscoelastic features as biomechanical markers for assessing cell types and states

Stress relaxation and creep experiments with the atomic force microscope: a unified method to calculate elastic moduli and viscosities of biomaterials (and cells)

1305 Quantitative Evaluation of Elastic Properties of Mesenchymal Stem Cells by AFM

Atomic force microscopy indentation and inverse analysis for non-linear viscoelastic identification of breast cancer cells

Optimizing the accuracy of viscoelastic characterization with AFM force-distance experiments in the time and frequency domains

A Simulation of the Mechanical Testing of the Cell Membrane and Cytoskeleton

A Cell’s Viscoelasticity Measurement Method Based on the Spheroidization Process of Non-Spherical Shaped Cell

Nanodiamond-based spatial-temporal deformation sensing for cell mechanics

Spectroscopic Investigation of Local Mechanical Impedance of Living Cells

Nanomechanical and topographical imaging of living cells by atomic force microscopy with colloidal probes