Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

Guidance for Treatment of High-Temperature Creep in Fire Resistance Analysis of Concrete Structures

High-Temperature Creep Buckling Phenomenon of Steel Columns Subjected to Fire

Effect of fire on concrete and concrete structures

A Practical Approach for Fire Resistance Design of Restrained High-Strength Q690 Steel Beam Considering Creep Effect

A Numerical Investigation of High-Strength Steel H-SA700 of Protected Beam with Cavity Under Elevated Temperature Including Creep Behavior

Influencing factors for fire performance of simply supported RC beams with implicit and explicit transient creep strain material models

Transient Creep Strain of Fly Ash Concrete at Elevated Temperatures

Effects of High Temperature on Creep Behaviour of Glazed Hollow Bead Insulation Concrete

Some Critical Issues in Creep and Fracture Assessment at High Temperature

Assessment on Stress Estimation Method for Creep Evaluation of Components at Elevated Temperature Within Elastic Analysis Routine

Creep effect on critical strength of high-strength steel columns exposed to fire

Creep Model of High-Performance Concrete at Different Loading Ages

Tensile Creep Behavior of Concrete Subject to Constant Restraint at Very Early Ages

Modeling of Creep Behavior of High Strength Steel H-SA700 Columns at Elevated Temperature

On Creep Fatigue Interaction of Components at Elevated Temperature

Measurement and Modeling of Creep Property of High-Strength Concrete Considering Stress Relaxation Effect

A Probabilistic Framework of Creep Life Assessment of Structural Components at Elevated Temperatures

Microstructure investigation, strength assessment, and thermal modelling of concrete exposed to different heating cooling regimes

Effect of creep on corrosion-induced cracking

Investigation of Fire Effects on Reinforced Concrete Members via Finite Element Analysis.

Investigating the Influence of Fluctuating Humidity and Temperature on Creep Deformation in High-Performance Concrete Beams: A Comparative Study between Natural and Laboratorial Environmental Tests